Daim Ntawv Qhia Tus Neeg Siv

Quick Start Guide
Plug-In Module Products
PMT-CC, PMR-AC, PMR-CC
©2012 Powerline Control Systems, Inc.
All Rights Reserved v2.01
19215 Parthenia St. Suite D
Northridge, CA 91324
P: 818.701.9831
[e-mail]
www.pcslighting.com
https://pcswebstore.com
WIRING DIAGRAM
OPERATION
Linking a Transmitter to a Receiver
Any SimpleWorx transmitter can remotely control one (or more)
SimpleWorx Receiver(s) by following the steps below to “LINK”
the two together:
1
At the SimpleWorx Transmitter; Press and hold its
rocker switch or Link button for 6 seconds. The LED
will flash GREEN and flash its load
(if a load is
connected)
2
At the SimpleWorx Receiver; Press and hold the
rocker switch or link button for 6 seconds. The LED
will flash GREEN and flash its load
(if a load is
connected)
3
The Receiver will indicate (within 30 seconds) the
two devices have automatically “LINKED” to one
another when the LED stops flashing and blinks its
load once.
4
The Transmitter may be taken out of “LINK” mode by
tapping its rocker switch or link button once. The
LED will stop flashing and blinks its load
(if a load is
connected)
.
Note:
The TX will automatically timeout in after 5
minutes
Neutral
Line
Ground
PMR-AC
PMT/R – CC
Contact
Input or Output
Status LED Indicator
The PMT and PMR are each equipped with a bi-color status LED
that is normally lit to red. This LED indicator will flash different
colors to indicate configuration status as outlined below:
LED Color Status
Solid RED Power applied to Module
Flashes GREEN Device is in LINK MODE
Solid GREEN Transmitting a SPC™ message
CERTIFICATION
This product has been thoroughly tested by
Intertek Testing Services, a nationally
recognized independent third-party
laboratory. The North American ETL Listed
mark signifies that the product has been
tested to and has met the requirements of a
widely recognized consensus of US and Canadian product safety
standards, that the manufacturing site has been audited, and that
the manufacturer has agreed to a program of quarterly factory
follow-up inspections to verify continued conformance.
LIMITED WARRANTY
Seller warrants this product, if used in accordance with all
applicable instructions, to be free from original defects in materials
and workmanship for a period of five years from the date of
purchase. Refer to the warranty information on the PCS website
(www.pcslighting.com) for exact details.