Phau Ntawv Qhia

7) SiriusXM Radio Antenna Installaon
Once you have the audio and power connected it's me to install the SiriusXM Radio antenna.
It is recommended to select a locaon on your UTV that will allow the antenna to have maximum clearance from
a roof or other objects. Please refer to the installaon instrucons packaged with the antenna included in the kit.
8) Connecon the Antenna to the Cradle
1. Run the antenna cable from the antenna either inside the roll cage pipe
tubing or along the outside securing the antenna cable with cable es (not
supplied). Be sure not to over ghten the cable es as the stress could
cause damage to the antenna wire.
2. Bring the antenna connecon to the desired locaon (dry box is
recommended) to the SiriusXM receiver. It is recommended to leave some
slack in the cable.
3. Connect the antenna wire to the antenna port (ANT) on the docking cradle.
If addional cable is required to complete the installaon antenna extension
model SBRGT-5 is recommended.
9) Power Up and Tune Radio
Aer connecng the antenna, power, and audio to the
receiver docking cradle you will need to tune the
Radio to an empty FM radio channel.
To find an empty FM channel in your area visit:
hps://www.siriusxm.com/frequency
IfÊthereÊisÊstacÊweÊrecommendÊtoÊselectÊaÊdifferentÊFMÊchannel.
Pixel Technologies, Inc. | www.pixelsatradio.com | [e-mail] | [phone]