Phau Ntawv Qhia

ManualsBrandsib pixel ManualsPXUTVKTPixel PXUTVKT Satellite Radio UTV Kit

Before geng started locate the best place to install the receiver, where to connect to power and the best

to install the antenna. The diagrams used in this instrucon sheet reference a 2019 Polaris® Turbo S.

It is important to note that your installaon may be diﬀerent from what is pictured in the instrucons.

It is recommended to disconnect all vehicle power before starng the installaon.

Included in the kit are the following parts:

(1) SiriusXM Radio UTV Antenna

(1) Hardwired Power Adapter

(1) SXVD1 SiriusXM Receiver Dock

(1) AM / FM Antenna Adapter (for Ride Command® and other UTV sound systems)

(1) FMDA25 Direct Wire Audio Adapter

(1) Protecve Zipper Case for the SiriusXM receiver

1) Selecng the Correct Antenna Adapter

Included in the kit are two FAKRA antenna adapters that are used to connect the FMDA25 to the Ride

Command® antenna system. For vehicles prior to 2020 use the blue colored adapter.

For vehicles manufactured in 2020 and newer use the cable with the black FAKRA connector.

PXUTVKT - Satellite Radio UTV Kit

Installaon Instrucons

Blue for vehicles prior to 2020

Black for 2020 vehicles and newer

Universal antenna adapter cable

Please Note: An addional installaon opon is via AUX cable. Locate the AUX port located on the dock.

Use an auxiliary cable to connect the dock to your sound system.

Pixel Technologies, Inc. | www.pixelsatradio.com | contactus@pixelsatradio.com | (800) 595-0845

Summary of content (5 pages)

PAGE 1
PXUTVKT - Satellite Radio UTV Kit Installa on Instruc ons Before ge ng started locate the best place to install the receiver, where to connect to power and the best to install the antenna. The diagrams used in this instruc on sheet reference a 2019 Polaris® Turbo S. It is important to note that your installa on may be diﬀerent from what is pictured in the instruc ons. It is recommended to disconnect all vehicle power before star ng the installa on.
PAGE 2
) Connec ng Adapters to FMDA25 If your vehicle has an AM/FM antenna to you can s ll use the antenna with the FMDA25. The FMDA25 allows the AM/FM signal to pass-thru to the Ride Command® system (or other a ermarket stereo system). 1. Connect the RCA-FKA adapter cable into the female socket on the TO VEHICLE FM ANTENNA port on the FMDA25 2.
PAGE 3
) Locate the RIDE COMMAND® AM/FM Antenna Port 1. Locate the AM / FM antenna connector in your UTV. The color and loca on may vary based on the year and model of your vehicle. In our example it is the connect on the right of the connec on cluster shown below. 4) Connect the FMDA25 to the Vehicle AM/FM Antenna Port Plug the connec on from the FMDA25 labeled "TO VEHICLE FM RADIO" into the RideCommand® Antenna port. Make sure the connector is pushed all the way down and the FAKRA connectors snaps in.
PAGE 4
Step 5) Connect the Audio Cables to the SiriusXM Dock On the FMDA25 locate the audio cable labeled "TO SIRIUS RADIO" and connect the cable into the FM Port on the docking cradle. Shown by the arrows in the pictures below. FM Out Port Step 6) Connec ng Power Included in the package is a hardwired power adapter. Please refer to the a ached instruc on sheet for the 5V-HPK hardwired power adapter. Connect the power adapter to the power port on the docking cradle (PWR).
PAGE 5
7) SiriusXM Radio Antenna Installa on Once you have the audio and power connected it's me to install the SiriusXM Radio antenna. It is recommended to select a loca on on your UTV that will allow the antenna to have maximum clearance from a roof or other objects. Please refer to the installa on instruc ons packaged with the antenna included in the kit. 8) Connec on the Antenna to the Cradle 1.