Instructions

User Manual
01
02
04
03
INSTALLATION CUBO FLAT ANCHOR
Use a Phillips head screwdriver to tighten the
screws holding the side anchors.
The profile frame is completely installed.
Attach the RJ-45 connectors on the cover
connectors and crimp as shown in figure A.
Put the cover on the rail with the connectors
and gather up the extra cable.
Remove the V/D connectors with a fine-tipped
screwdriver.
Run the V/D cables through the opening in the
end cover.
Strip the wires
A
INSTALACIÓN CUBO CETAS A 90º
Con un destornillador de punta philips atornillar
las zetas de sujeción de los laterales.