Operation Manual

iAUDIO 5

What is JetShell?

JetShell is the iAUDIO manager program providing the following features:

• Downloading/Uploading ﬁles from/to iAUDIO.

• File management similar to Windows Explorer

• Playing MP3, MP2, WAV, WMA, ASF, Audio CD, and Playlist (m3u)

• Copying (ripping) MP3 ﬁles from Audio CD

• Converting between WAV/MP3/WMA

• Changing bitrate of MP3 ﬁles

• Convenient ﬁle transfer using Download List

• A wide selection of spectrums, equalizers, and sound effects

• Editing ID3 tags

• Downloading iAUDIO logo

• Formatting the ﬂash memory

Running Environment for JetShell

• Pentium 200 Mhz or higher

• 32 MB or more memory

• 20 MB or more hard disk space

• 256 Color or higher display

• Windows 98/ME/2000/XP (NT is not supported)

• USB Port 1.1 or higher

• CD-ROM drive

• Sound Card, Speaker or Headphone

1. When you insert iAUDIO installation CD in the CD-ROM drive, the installation program starts

automatically. It may not start automatically depending on the settings of Windows. In this case, run

x:\setup.exe or x:\JetShell\setup.exe. (where x is the letter of your CD-ROM drive)

2. When the installation ﬁnishes, Start -> Program -> COWON -> iAUDIO5 program group is cre

ated.

3. You are now ready to connect iAUDIO to PC (Don’t run JetShell at this time).

Connect the USB ports of iAUDIO to your PC using the provided USB cable.

(We recommend to connect iAUDIO to the PC directly, not using USB hub)

4. As soon as the cabe is connected, the message “Found New Hardware” appears and the USB

driver for iAUDIO is installed automatically. The driver installation message may not appear on the

screen depending on the status of Windows. To make sure that the installation was completed nor

mally, check for the device “iAUDIO” in My Computer as shown below, or “Control Panel -> System

-> Hardware -> Device Manager”.

5. Now you can transfer ﬁles by using JetShell or Window Explorer.

Connecting iAUDIO and Installing JetShell