Operation Manual

iAUDIO 5
36
iAUDIO 5
37
4. Mic Volume
• Set the volume level of the built-in mic.
• Volumes that are too high may cause amplified noise, electric noise, peaking or
distortion and degrade the recording quality.
• You can select a value between 1 and 10. Higher values mean higher amplification.
• Select Mic Volume and press the MENU button. Use the + and – buttons to select
a desired value.
5. Voice Active
• Recording pauses when there is no sound input during recording and restarts
when there is sound. This feature saves memory.
• You can select a value between 0 and 10. Smaller values mean greater sensitivity.
If you set this value too high relative to the surrounding sounds, recording may
not be activated as intended. Set this value to 0 when making important recording
to guarantee that recording begins.
• Select Voice Active and press the MENU button. Use the + and – buttons to
select a desired value.
6. Line Volume
• Set the volume level of incoming signals from the Direct Encoding jack.
• You can select values between 1 and 10. Higher values mean higher
amplification.
• Select Line Volume and press the MENU button. Use the + and – buttons to
select a desired value.
7. Auto Sync
• Auto Sync senses sound from the Line-in jack and automatically recognize blank
intervals between tracks to create separate files for different tracks.
• You can select between 0 and 8. 0 is Off. Higher values means longer interval
between tracks.
• The above numbers are not in seconds.
• Select Auto Sync and press the MENU button. Use the + and – buttons to select a
desired value.
Detailed Descriptions by Menu
Recording
Recording
1. Line-in bps
• Set the bit rate (quality) of MP3 files recorded through Line-in.
• You can select 96, 112, 128 kbps.
• Select Line-in bps and press the MENU button. Use the + and – buttons to select a
desired value.
2. Voice bps (Built-in Mic)
• Sets the bit rate (quality) of files recorded through the built-in mic on the front of
iAUDIO.
• You can select 96, 112, 128 kbps.
• All MP3 files recorded through the built-in mic are Mono.
• Select Voice bps and press the MENU button. Use the + and – buttons to select a
desired value.
3. FM Radio bps
• Set the bit rate (quality) of MP3 files recorded by pressing REC while listening to
FM radio.
• You can select 96, 112, or 128 kbps.
• Select FM Radio bps and press the MENU button. Use the + and – buttons to select a
desired value.
Detailed Descriptions by Menu
Recording