How-To Guide

01
02 03
04 05
06 07
08 09
10 11
12
13
14 15
16 17
18
Product maintenance
Battery
Charging stand and charging electrode
Universal wheel
Upgrade the firmware
Wheel
Bearing
Bracket
1.The high-performance lithium-ion battery pack is built in
the machine. And the battery has no memory effect and it is
no need to worry about repeated charging/discharging.
2.In order to maintain the best performance, keep the
machine charging on the charging stand if it does not work.
3.After the machine is fully charged, please turn it off if it
does not work. Keep charging for a long time may damage
the battery.
1.1.Universal wheel.
2. Clean the hair and dust on the wheel and bearings.
3. Assemble the universal wheel again after dried completely
1.Please check and update the firmware through the settings
of APP.
2.Make sure the robot is charging and battery is higher than
60% when you upgrade the APP , please refer to the
procedure in the APP operation instruction.
1.Please wipe the charging stand and charging electrode
with a soft dry cloth in the condition of disconnection of
power.
2.Please wipe the charging stand and charging electrode
regularly to avoid problem of charging of the machine on the
charging stand.