How-To Guide

01
02 03
04 05
06 07
08 09
10
11
12 13
14 15
16 17
18
Product maintenance
Cleaning of rolling brush Cleaning of side brush
Rolling brush cover
Side brush
Buckle
Rolling brush
Rolling brush slot
1.Turn the machine and press the buckle on the rolling brush
cover from both ends to remove the rolling brush.
1.Turn the machine, lift the left and right brushes up and pull
them out.
2.Clean the windings on the left and right brushes and their
bearings.
3.Align the side brush with its bearing on the machine and
press firmly to install the left and right brushes.
2.Clean the windings on the rolling brush with the matching
cleaning brush. After cleaning, install the rolling brush and
fasten the cover.
It is recommended to clean the rolling brush regularly and
replace it timely as the wear situation.
It is recommended to clean the side brush regularly;
If the side brush is damaged, please pull out the damaged
side brush directly, and align the new side brush with its
bearing and press firmly.