How-To Guide

02 03

04 05

06 07

08 09

10 11

12 13

14 15

16 17

Quick instruction

01. In case the main machine is being charged on the

charging stand, it will automatically turn on.

02.During its charging, the machine cannot be turned off.

03.Long press the power key, the power indication light will

light up and the machine turns on. Meanwhile, there will be

a voice prompt after completion of turning on.

04.In case the main machine is static, long press the power

key to turn it off.

Before connecting the network, please make sure that the

mobile phone and the machine are within the WiFi

cover-age and as close as possible to the router.

In case the router configuration or the password is changed,

or the mobile phone cannot be connected to the device due

to other reasons, reset the WiFi of the machine for pairing.

Reset method:

After turning on the machine, press both the power key and

the recharge key simultaneously for 3 seconds until you

hear the voice prompt and the WiFi indication light sl owly

flashes, which indicate that the WiFi reset is suc-cessful.

Device pairing:

Open the APP to add device and operate by following APP

prompts.

Please scan the QR code below to download and install the

mobile client. For details, please refer to the APP Operation

Guide.

Robot vacuum cleaner does not support 5G WiFi;

And it does not support WiFi with WEP encryption.

Short press the power key or use the APP to start the

cleaning task.

Notes: The cleaning cannot be started if the battery is too

low. It is recommended to fully charge before initial using.

Android IOS

3.On/Off 5. Connection network for the machine

6.Start cleaning

4.Install the mobile client to bind the robot vacuum

cleaner