How-To Guide

02 03

04 05

06 07

10 11

12 13

14 15

16 17

Quick instruction

2. Charge the robot vacuum cleaner on the charging

stand

Signal indication light

Power interface

Charging terminal

>1m

>2m

01. After cleaning, the machine will automatically return to

the charging stand for charging. If it cannot return to the

charging stand, try to remove the obstacles around the

charging stand or take the cleaner back to the charging

stand for charging.

02.During the cleaning, if the battery of the machine is lower

than 20%, it will automatically return to the charging stand

for charging. After the battery is fully charged, it will automat-

ically return to the breakpoint to continue clean-ing.

03.If the machine is turned off automatically due to low

power, you can manually take it back to the charging stand

for charging. Make sure the charging electrode is in good

contact and check whether the charging indication light is

on.

During the charging of the robot vacuum cleaner on the

charging stand, it will automatically turn on.

1.Charging stand

Take the charging stand out from the package.

Please make sure that no obstacles in the space of

1 m on both sides and 2m ahead of the charging

stand.