Operating Instructions

10
1. Focussing
The Bestguarder camera module has a focussing system that allows the user
to focus the reticle prior to use while attached to the scope.
Reticle is out of focus Reticle is in focus
The camera module has a unique focussing mechanism. This allows the camera lens
to be adjusted via the external focussing dial located on the upper side of the camera
module. The user can focus the camera on the rifle scope reticle without removing the
camera from the rifle scope sleeve. By turning the focussing dial this turns the lens
wheel in the same direction. The Bestguarder camera lens is fully tightened in to the
camera so by turning the focussing lens anti-clockwise when using for the first time will
focus the camera correctly.
2. Recording
Three mode: Photo/Video/Time lapse(photo only) .
The Bestguarder camera module has the capability to capture all of your
favourite moments simply at the push of a button.
1) Before powering the camera module, place the micro SD card into the
slot on the face of the camera module. Ensure the micro SD card is fully
inserted as failure to do so will prevent recording to the micro SD card.
2) Power the camera module via the button on the face of the camera
module. The red light appears steady on the back of the camera unit. The
camera is now ready to record.