Owner manual

302
INTELLIGENT ACTUATOR
Appendix
Appendix
A
x
i
s-
S
pec
ifi
c
P
arameters
No Parameter name
Default value
(Reference)
Input range Unit Remarks
87 Zone 1 MIN 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
88 Zone 1 output number 0 0 to 899 Physical output port or global flag (Output is invalid if “0” is
input; multiple specification is invalid) (“0” can be input in PC
software version 1.0.0.0 or later or TP application version 1.06
or later)
89 Zone 2 MAX 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
90 Zone 2 MIN 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
91 Zone 2 output number 0 0 to 899 Physical output port or global flag (Output is invalid if “0” is
input; multiple specification is invalid) (“0” can be input in PC
software version 1.0.0.0 or later or TP application version 1.06
or later)
92 Zone 3 MAX 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
93 Zone 3 MIN 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
94 Zone 3 output number 0 0 to 899 Physical output port or global flag (Output is invalid if “0” is
input; multiple specification is invalid) (“0” can be input in PC
software version 1.0.0.0 or later or TP application version 1.06
or later)
95 Zone 4 MAX 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
96 Zone 4 MIN 0 -99999999 to
99999999
0.001
mm
Valid only when MAX > MIN. * Must be inside the range for at
least 3 msec.
97 Zone 4 output number 0 0 to 899 Physical output port or global flag (Output is invalid if “0” is
input; multiple specification is invalid) (“0” can be input in PC
software version 1.0.0.0 or later or TP application version 1.06
or later)
98 to
120
(For expansion) 0
a
PC: PC software
TP: Teaching pendant