Owner's manual

* Supplement
292
Controller no connection error. Communications cannot be established or an unsupported controller is connected. The probable causes are as follows: 㽲 It is a communication failure due to a break in or noise from the communication line. 㽳 The communication baud rate of the controller is not supported by the teaching pendant.
(The failure may be resolved by the controller power reconnection.)
㽴 The model not supported by the teaching pendant is connected. (Refer to Support Models.) The EMERGENCY STOP button of the teaching pendant is pressed. Non-supported controller is connected.
CTL Not Connected Emergency Stop Non-supported CTL is connected
DEE
DEF
DF0