Owner manual
16
Note :
Some tapped holes for attachment are through holes. Do not attempt to use a long screw
with the length more than the effective screw length of the hole. Doing so may damage the
mechanical parts or electrical parts inside.
The temperature of the unit gets very high in a continuous operation. To lessen the
temperature rise of the unit, install it on a material such as metal that possesses high heat
conductivity performance.
It may cause an extreme temperature rise on the unit, and may end up with a breakdown.
(Reference)
When operated with duty 50%, the temperature rises in approximately 40C at the unit
attachment surface (side surface) and finger attachment surfaces.
[Refer to 6.4 Temperature Rises on Main Body and Finger]