Owner manual

68
13. Maintenance Inspection
13.9 Stainless Sheet Replacement (for models with slider cover)
It is possible to replace the stainless sheet without removing the slider cover.
[Items required for replacing the stainless sheet]
y Replacement stainless sheet
y Hex wrench set
y Cellophane tape
[Part names]
[Procedure]
[1] With a 1.5 mm hex wrench, remove the four screws securing the stainless sheet and the two
stainless sheet retainer plates.
[2] Pull out the old stainless sheet.
Stainless sheet
retainer plates
Stainless sheet
Slider cover