Manual

5.2 IX-INN50H/60H/70H/80H

Secure the arms with arm locking plates, and loop the cables around the base and secure them with adhesive

tape, etc.

If a crane is used, install the supplied eye-bolts (2 pcs) on the robot and transport the robot using the eye-bolts.

Remove the top cover of arm 1 and install the eye-bolts in the positions shown in the figure.

IX-INN50H/60 07NNI-XIH H/80H

• It is dangerous not to secure the cables because they may be dragged and catch your feet.

• Do not attempt to transport or move the robot by directly carrying it, because you may hurt your back or

drop the robot onto your feet.

• If the robot drops during transport you may be pinned down and sustain serious injury.

• Never stand underneath the robot while it is suspended,

• Use an appropriate hoist and ropes whose payload is sufficiently greater than the mass of the robot.

• If any machine or means is used that requires a specified qualification, it must be operated by a person

having the required qualification.

WarningDanger

Remove the cover and install the

supplied eye-bolts in the

positions shown in the figure.

Remove the cover and install the

supplied eye-bolts in the

positions shown in the figure.

Secure each arm with a plate.

Loop the cables around the base

and secure them with tape, etc.

Must be higher than the

landing surface.