User guide

3. Menu Window

3.3 Explanation of the Toolbar

This section explains the toolbar (Fig.3.27) shown at the top of the main window (below the menu bar).

Fig. 3.29 Toolbar

Open File Same as clicking File (F) and then selecting Open (O).

Save Same as clicking File (F) and then selecting Save (S).

Edit Program Same as clicking Program (S) and then selecting Edit (E).

Edit Position Same as clicking Position (O) and then selecting Edit (E).

Edit Parameter Same as clicking Parameter (P) and then selecting Edit (E)

Edit Symbol Same as clicking Symbol (Y) and then selecting Edit (E)

Edit Coordinate System

Definition Data

Same as clicking Coordinate System (D) and then selecting Edit (E).

This item is displayed for X-SEL-JX/KX and PX/QX controllers.

Monitor Input Port Same as clicking Monitor (M) and then selecting Input Port (I).

Monitor Virtual Input Port Same as clicking Monitor (M) and then selecting Virtual Input Port (N).

Monitor Output Port Same as clicking Monitor (M) and then selecting Output Port (O).

Monitor Virtual Output Port Same as clicking Monitor (M) and then selecting Virtual Output Prot (U).

Monitor Global Flag Same as clicking Monitor (M) and then selecting Global Flag (F).

Monitor Global Integer

Variable

Same as clicking Monitor (M) and then selecting Global Integer (L).

Monitor Global Real

Variable

Same as clicking Monitor (M) and then selecting Global Real (R).

Monitor Global String

Variable

Same as clicking Monitor (M) and then selecting Global String (G).

End All Operations Same as clicking Program (S) and then selecting End All Programs (T).