User guide

3. Menu Window
63
(2) Edit (E)
This menu lets you perform operations used in editing data.
[1] Undo (U) Up to the most recent 10 operations can be canceled. However, they
cannot be canceled when you perform any of the following operations:
• Transfer of data on the editing screen such as the program edit window
to the controller
• Saving of data on the editing screen such as the program edit window
in a file
• Closing of the editing screen such as the program edit window
The following are the operations for which this function is enabled:
Input
Line
insertion
Line
Deletion
Cut Paste
Program Edit Window
{ { { { {
Position Edit Window
{
- -
{ {
Symbol Edit Window
{
- -
{ {
Parameter Edit Window
{
- - - -
Coordinate System Data Edit
Window
{
- - - -
RC-axis Position Data Edit Window
{
- -
{ {
When this operation is performed, the warning screen in
Fig.3.14 will be displayed.
Clicking Yes will cancel the operation executed immediately
before.
Fig. 3.14 Warning
[2] Cut (T) Cut the data corresponding to the cursor line in the edit window and save
the data to the clipboard.
[3] Copy (C) Copy to the clipboard the data corresponding to the cursor line in the edit
window.
[4] Paste (P) Paste the data on the clipboard to the cursor line in the edit window.
[5] Find (F) Find a specified character string.
[6] Find Next (S) Find the character string specified in [5] again, starting from the cursor line
position.
(3) View (V)
This menu lets you set options relating to screen views. (Refer to ‘3.4 Tree View’)
[1] Tree View (T) Show/hide the tree view that appears on the left side of the main window.
[2] Font (F) Set the font of text shown in the windows.