User guide

2. How to Save Data
54
Parameter file saved by
controller incompatible
with increased memory
Parameter saved by
controller compatible
with increased memory
Parameter file saved by
controller compatible with
increased memory
Parameter saved by
controller incompatible
with increased memory
When parameter file saved by controller compatible with
increased memory is transferred to controller
incompatible with increased memory
When parameter file saved by controller incompatible with
increased memory is transferred to controller compatible
with inc
r
eased memory
Note on the increased number of parameters:
The number of the parameters has been increased for the X-SEL-P/Q, PX/QX controllers (w/gateway
function) compatible with increased memory.
The Number of Parameters
X-SEL-P/Q incompatible
with increased memory
X-SEL-PX/QX
incompatible with
increased memory
X-SEL-P/Q, PX/QX
compatible with
increased memory
I/O 250 400 600
For all axes
120 300 400
For each axis
200 220 250
Driver
97 97 97
Encoder
30 30 30
I/O Device
82 82 82
Others
100 120 200
Please be noted as follows.
* When the parameter file saved by the X-SEL-P/Q, PX/QX controller incompatible with increased memory
is transferred to the X-SEL-P/Q, PX/QX controller compatible with increased memory, or when the
parameter file saved by X-SEL-P/Q, PX/QX controller compatible with increased memory is transferred
to the X-SEL-P/Q, PX/QX controller incompatible with increased memory, only the parameters supported
by the X-SEL-P/Q, PX/QX controller incompatible with increased memory, as shown below.