User guide

1. Before You Begin
16
DP-1
T
T
Type External Connection Cable
IA-101-X-USBMW
USB conversion adapter (IA-CV-USB): 1 unit
USB cable (CB-SEL-USB030): 1 piece
RS232C cable (CB-ST-E1MW050-EB): 1 piece
Connection
Configuration
Compatible controller
USB conversion adapter XSEL-P, PX, R, RX, RXD
USB cable RS232C cable
CB-SEL-USB030 CB-ST-E1MW050-EB
Type External Connection Cable
IA-101-TT-USB
USB cable (CB-SEL-USB030): 1 piece
Dummy Plug (DP-1): 1 unit
Connection
Configuration
Dummy plug
USB cable
CB-SEL-USB030
1.2 System Requirements
The following operating environment is required to run this software.
Type Operable OS
IA-101-X-MW-J
IA-101-X-MW
IA-101-XA-MW
IA-101-X-USB
IA-101-X-USBMW
IA-101-TT-USB
Windows 2000 SP4 or later, Windows XP SP2 or later
*1
,
Windows Vista
*2
, or Windows 7
*2
Supported OS
*1: Supported by software version V7.00.00.00 or later.
*2: Supported by software version V8.01.00.00 or later.
32-bit and 64-bit operating systems are supported.
Computer PC compatible with supported OS (Windows)
Keyboard Keyboard compatible with a PC compatible with supported OS (Windows)
Memory Capacity of memory necessary to run a supported OS (Windows)
Display XGA and above
Pointing device Mouse or a compatible driver
Storage medium drive CD-ROM drive
Hard disk Hard disk with at least 20 MB of available space
(The software is installed on the hard disk.)
Serial port RS232C
(EIA-S74 compliant)
Required for PC software of the following model number:
Model number: IA-101-X-MW-J, IA-101-X-MW, IA-101-XA-MW
USB port Required for PC software of the following model number:
Model number: IA-101-X-USB, IA-101-X-USBMW, IA-101-TT-USB