User guide

8. Parameter Edit Window
124
(4) Restarting the controller (software reset)
After the data has been written to the flash ROM, the following confirmation dialog box with the message,
"Restart the controller" will be displayed.
Yes The new parameters will become effective.
No The new parameters will not become effective.
The parameters will become effective after the controller is restarted (software reset) or the
controller power is reconnected.
Fig. 8.7 Confirmation
(5) Closing the parameter edit window
Attempting to close the parameter edit window will display the following confirmation dialog box with the
message, "Save edited data in the Controller?"
Fig. 8.8 Confirmation
Yes The edited data will be transferred to the controller ĺ (3), "Writing to the flash ROM"
No The software will close the parameter edit window without saving the edited data.
Cancel The software will not close and go back to the parameter edit window.
•*The user of the PC software is recommended to back up the parameters when the controller is delivered
and also when the system into which the controller has been assembled is started.
* There are many customizable parameters. It is recommended that you back up the parameters
frequently just like you do the programs.