Instruction Manual

Chapter 1 Specications Check1.1 Product Check
32
1.1.2 Teaching Tool
The teaching tool is necessary to perform setup operations such as position and parameter
settings through teaching or other means. The teaching tools listed below are available for
ERC3. However, the available teaching tools differ for MEC Mode Type and CON Mode Type.
Prepare an appropriate one considering the controller type.
({: Available ×: Unavailable)
Controller Type
No. Part Name Model
CON Mode Type
(Model: CN)
MEC Mode Type
(Model: MC)
1 Quick Teach RCM-PST-0 ×
{
2
PC Software
(Includes RS232C Exchange Adapter 
Peripheral Communication Cable)
RCM-101-MW
{
×
3
PC Software
(Includes USB Exchange Adapter  USB
Cable  Peripheral Communication
Cable)
RCM-101-USB
{
×
4 MEC PC Software – ×
{
5
Teaching Pendant
(Touch Panel Teaching)
CON-PTA
{ {
6
Teaching Pendant
(Touch Panel Teaching with deadman
switch)
CON-PDA
{ {
7
Teaching Pendant
(Touch Panel Teaching with deadman
switch  TP Adapter (RCB-LB-TG))
CON-PGA
{ {
8 Teaching Pendant SEP-PT ×
{
1.1.3 Instruction manuals related to this product, which are contained in the DVD.
No. Name Manual No.
1 ERC3 Controller Instruction Manual ME0297
2
PC Software
RCM-101-MW/ RCM-101-USB Instruction Manual
ME0155
3 MEC PC Software Instruction Manual ME0248
4 Touch Panel Teaching CON-PTA/PDA/PGA Instruction Manual ME0295
5 Touch Panel Teaching SEP-PT Instruction Manual ME0217
6 Instruction Manual for the serial communication [for Modbus] ME0162