Instruction Manual

Chapter 3 Wiring 3.4 MEC Mode 1 (Operation with PLC)
123
3.4 MEC Mode 1 (Operation with PLC)
3.4.1 Wiring Diagram (Connection of construction devices)
I/O type of the model code is NP or PN.
It is available to have a try run and teaching with Quick Teach.
Note 1 䎬t is not necessary to connect a power source to Quick Teach. If Quick Teach is equipped with
a power supply unit (100V type / 200V type / EU destination type), remove the power supply
unit.
The emergency stop input terminal is treated with short-circuit by a jumper. Remove the
jumper if necessary and connect devices such as an emergency stop switch (always closed
and open in emergency stop).
Note 2 ƑƑƑ indicates the cable length. (Example) 030 = 3m
ERC3
DC24V
ࡕ࡯࠲㔚Ḯ
೙ᓮ㔚Ḯ
CB-ERC3P-PWBIOƑƑƑ
࠲࠶
࠴
ࡄ
ࡀ
࡞
࠹
ࠖ
࡯
࠴
ࡦ
ࠣ
߹ߚߪ࠹ࠖ࡯࠴ࡦࠣࡏ࠶ࠢࠬ
 ࠝࡊ࡚ࠪࡦ 
 ᵈ 1
ࡉ࡟࡯ࠠ⸃㒰ࠬࠗ࠶࠴
 ᵈ 
ࡉ࡟࡯ࠠઃ߈ࠕࠢ࠴ࡘࠛ࡯࠲ߩ
႐วߪᔅⷐߢߔޕ
PLC
ᵈ
ࡄ࠰ࠦࡦኻᔕ࠰ࡈ࠻
ࠝࡊ࡚ࠪࡦ
ᵈ1
PERSONAL
COMPUTER
MEC PC Software
(Download from homepage)
Power Supply
(Please prepare separately)
Accessory Cable for ERC3
(N
o
t
e
2)
Teaching Pendant
(Please purchase separately)
Quick Teach
(
N
o
t
e
1)
(Please purchase
separately)
CB-PST-SIO050
(Optional casing for Quick Teach)
Brake release switch
It is a switch to release the brake compulsorily for the actuator
equipped with a brake.
It is convenient when in maintenance or adjustment work if it is
installed.
When using Quick Teach, the brake compulsory release switch
equipped in Quick Teach is available.
24V DC