Owner's manual
Table Of Contents
- Cover
- Please Read Before Use
- CAUTION
- CE Marking
- Table of Contents
- Safety Guide
- Caution in Handling
- 1. Overview
- 2. Installation
- 3. Wiring
- 3.1 Basic Structure
- 3.2 Configuration Using a SIO Converter
- 3.3 Configuration Using an Isolated PIO Terminal Block
- 3.4 Configuration Using Both SIO Converter and Isolated PIO Terminal Block
- 3.5 Specifications of I/O Signals
- 3.6 I/O Signals for PIO Pattern 1 [3 Points] (Air Cylinder)
- 3.7 I/O Signals for PIO Pattern 0 [8 Points]
- 3.8 I/O Signals for PIO Pattern 2 [16 Points] (Setting by Zone BoundaryParameters)
- 3.9 I/O Signals for PIO Pattern 3 [16 Points] (Setting in Zone Fields in thePosition Table)
- 3.10 Emergency-Stop Circuit
- 3.11 Extension Cable
- 4. Electrical Specifications
- 5. Data Entry
- 6. Operation in the “3 Points (Air Cylinder)” Mode
- 7. Operation in the “8 Points” and “16 Points” Modes
- 7.1 How to Start
- 7.2 Position Table and Parameter Settings Required for Operation
- 7.3 How to Execute Home Return
- 7.4 Home Return and Movement after Start (16 Points)
- 7.5 Positioning Mode (Back and Forth Movement between Two Points)
- 7.6 Push & Hold Mode
- 7.7 Speed Change during Movement
- 7.8 Operation at Different Acceleration and Deceleration Settings
- 7.9 Pause
- 7.10 Zone Signal
- 7.11 Incremental Moves
- 7.12 Notes on Incremental Mode
- 8. Parameter Settings
- 9. Troubleshooting
- 10. Maintenance and Inspection
- 11. Appendix
- Change History
25
2. Installation
16
2.1.3 (1) Rod Type with a Single Guide (RGS6C/RGS7C)
(2) Rod Type with Double Guides (RGD6C/RGD7C)
Connection port for teaching pendant or PC
(The arrow on the connector should face down.)
Non-motor end
Coupling bolt
Right
Left
Motor end
LED
Top
Bottom
Cable
Motor cover
Rod
Frame
Rear bracket
Motor bracket
Rear cover
Guide bracket Guide bearing
Guide rod
Connection port for teaching pendant or PC
(The arrow on the connector should face down.)
Non-motor end
Coupling bolt
Right
Left
Motor end
LED
Top
Bottom
Cable Motor cover
Rod
Frame
Rear bracket
Motor bracket
Rear cover
Mounting bracket
Guide bearing
Guide rod
Guide bracket