User Manual
Page 63
10. Explanation on Each Function Screen
10.3 Parameter Mode
The system parameters are written into the controller accordingly prior to shipment. In general, the customer does not need to
make modifications on his own. However, for customized system parameter changes, please contact IAI Service Department or
Techinical Support. Please do not attempt to make modifications on your own. Otherwise, IAI can not guarantee should
abnormalties occur as a result of your modification. If you wish to modify the parameters, please save the parameter contents.
The parameters will be effective once they are saved and the controller is reset. (Although an example initial value by the
teaching pendant will be displayed,
the actual shipment parameter will differ according to each actuator type.)
Axis Dec
F1 F2 F3 F4
Parm
Prog
Play
Test
Parm
Mode
Select
Axis
Sys
Srvo Home Motr Name
F1 F2 F3 F4
Parm Axis
Prog
Play
Test
Parm
Mode
Select
Axis
Sys
10.3-1 Axis Parameters
Srvo
Home
Motr
Name