User Manual

Page 18

F1 F2 F3 F4

Q Data input for point 1

Using the F1 Key (Wrt) to establish, the Position No.

will advance by 1, turning into 2.

Mdi - 1 No 1 [1] - 2

XXXXX.XX

X XXXXX.XXX

Input the number 0 and press the Return Key.

0.000 will display, and the axis number and name

will change to 2. Then, the cursor position will move

to the position data for the axis 2.

* It is possible to input position data up to for integer 4 digits before the decimal point and 3 digits after. The range depends on

the type of the machine. Therefore, please verify the range according to the appropriate product catalog.

Mdi - 1 No 2 [2] - 2

0.000 XXXXX.XX

Input 50 into the position data for axis 2, then,

press the Return Key.

*Since the cursor position moves every time the

Return Key is pressed, input in sequence, first axis 1,

then, axis 2. For input error, move the cursor to that

location and do a substitution.

F1 F2 F3 F4

Mdi - 1 No 2 [1] - 2

0.00

0 50.000

F1 F2 F3 F4

Mdi - 2 No 1 [1] - 2

XXXXX.XX

X XXXX.XXX

② Data input for point 2

Input 50 into the position data for axis 1, then press the

Return Key.

8. Examples of Simple Operation Procedure

Wrt Can Clr Etc