Manual

78
noisnapxE
noitidnoc
)RO·DNA(
tupnI
noitidnoc
)galF·O/I(
dnammoC
tsoP
)galF·troptuptuO(
dnammoC 1dnarepO 2dnarepO
lanoitpOlanoitpOCRA
gnissaP
1noitisop
gnissaP
2noitisop
EP
● ARC (Arc Movement)
12. SEL Language
[Function] Executes an arc motion from the current position to operand 2 position, passing through operand 1.
The output turns OFF during an arc move and turns ON upon completion. However, when other
commands as ARC, PATH and CIR follow in a consecutive order, turns ON at the 2nd point prior to the
last point.
* This command is available for the specified orthogonal plane (automatically selected by position
data). Generally the XY plane is selected.
[Example 1] ARC 100 101 Executes an arc motion from the current position to position 101,
passing through 100.
[Example 2] LET 1 5 Assign 5 to variable 1.
LET 2 6 Assign 6 to variable 1.
ARC *1 *2 Executes an arc motion from the currrent position
(passing through variable 1 content 5) to variable 2
(content 6) position.