Manual

63
12. SEL Language
● PSIZ (Check Position Data Size)
[Function] Checks the maximum size of the position data that can be used.
[Example] PSIZ 1 The maximum value of the position data goes into variable 1 (variable to be assigned) in
operand 1.
[Function] Stores the axis pattern of the position in operand 2 into the variable in operand 1.
[Example 1] PAXS 100 200 Store the axis pattern of position 200 into variable 100. When the points are set
as in the position table below, 2 (10 in binary notation) is stored in variable 100.
[Example 2] When the points are set as below, 2 (10 in binary notation) is stored in variable 100.
LET 1 3 Assign 3 to variable 1.
PAXS *1 *2 Assign 101 to variable 2.
LET 2 301 Store the axis pattern of the position for 101 which is the value contained in
variable 2, to variable 3 which is contained in variable 1. When the points are
set as below, 3 (11 in binary notation) is stored in variable 3.
noisnapxE
noitidnoc
)RO·DNA(
tupnI
noitidnoc
)galF·O/I(
dnammoC
tsoP
)galF·troptuptuO(
dnammoC 1dnarepO 2dnarepO
lanoitpOlanoitpOSXAP.oNelbairaV.oNnoitisoP
● PAXS (Read Axis Pattern)
noisnapxE
noitidnoc
)RO·DNA(
tupnI
noitidnoc
)galF·O/I(
dnammoC
tsoP
)galF·troptuptuO(
dnammoC 1dnarepO 2dnarepO
lanoitpOlanoitpOZISP.oNelbairaV