User Manual

90
6. Operation: Mode Flow Chart
6.9.2 Software Reset
Software reset (controller restart) will be performed.
The compatible models are PCON, ACON, SCON, RCP2, ERC2
Input
into “Adjust No.” and press the Return key.
The screen will change to the Software Reset screen.
Press the
key and press the Return key.
(When not resetting software, press the
key
and press the Return key. The screen will return to
the Mode Select screen.)
When the servo is ON, the screen will change to
the Servo OFF FRQ¿UPDWLRQ screen.
Press the
key and press the Return key. Then
the controller will restart and the screen will change
to the Mode Select screen. Since the servo is
automatically turned OFF, it is not required to turn
SON input OFF.