Owner's manual

110
6. Operation of SEP Controllers
[Jog operation]
You can acquire position data via jogging operation.
Operation on the jog screen
x [Jog-], [Jog+]: The axis jogs while each button is touched. [Jog-] moves the axis in the
negative direction, while [Jog+] moves the axis in the positive direction.
x [SV ON]: Touching [SV ON] while the servo is off turns on the axis servo and O
becomes lit. Touching [SV OFF] while the servo is on turns off the axis servo
and O becomes unlit.
x [HOME]: Touching [HOME] while home return is not yet completed causes the axis to
return home and O becomes lit.
x [Chg Vel]: The jog speed changes in the order of 1, 10, 30, 50 and 100 mm/s every time
[Chg Vel] is touched.
x [Inching]: Touching [Inching] changes to the inching screen.
Position acquisition operation
Touch [Acquire].A confirmation screen appears.
You can touch [n] or [p] to change the position number.
Touching [Yes] acquires the current position.