Owner's manual

Part 1 Installation
Chapter 3 Installation and Wiring
33
Part 1 Installation
(2) PNP specification (Program mode)
Pin No.
Category
Port No. Function Cable color
Input
External power supply 24 V
Program specification (PRG No. 1)
Program specification (PRG No. 2)
Program specification (PRG No. 4)
Program specification (PRG No. 8)
Program specification (PRG No. 10)
Program specification (PRG No. 20)
Program specification (PRG No. 40)
Software reset (restart)
Program start
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
1 - Brown
1 - Red
1 - Orange
1 - Yellow
1 - Green
1 - Blue
1 - Purple
1 - Gray
1 - White
1 - Black
2 - Brown
2 - Red
2 - Orange
2 - Yellow
2 - Green
2 - Blue
2 - Purple
2 - Gray
2 - White
2 - Black
3 - Brown
3 - Red
3 - Orange
3 - Yellow
3 - Green
Pin No.
Category
Port No. Function Cable color
Output
Alarm output
Ready output
General-purpose output
General-purpose output
General-purpose output
General-purpose output
General-purpose output
General-purpose output
External power supply 0 V
3 - Blue
3 - Purple
3 - Gray
3 - White
3 - Black
4 - Brown
4 - Red
4 - Orange
4 - Yellow
The above functions reflect the factory settings.