Owner's manual

AppendixError List (MAIN core) (In the panel window, the three
digits after “E” indicate an error number.)
438
Appendix
(In the panel window, the three digits after “E” indicate an error number.)
Error No. Error name Description, action, etc.
EAC
Servo control underrun error A servo control underrun error was detected.
EAD
Boot error A FPGA boot watchdog was detected. The core program may not be running
properly.
EAE
Application-update SCIF receive-queue overflow error Excessive data is received from outside. (Confirm that a PC and IAI’s update tool
are used to update the application.)
EAF
Installed flash ROM type mismatch (Core) The flash ROM type anticipated in the software does not match the flash ROM
type actually installed. Check the combination of software and hardware.
EB0
Undefined NMI error (Core) An undefined NMI interruption occurred.
EB1
FPGA read/write test error (Core) A read/write error of the FPGA.
EB2
Flash busy reset timeout (Core detection) Flash ROM malfunction. The busy status of the flash ROM is not reset.