Owner's manual

AppendixError List (MAIN application) (In the panel window, the
three digits after “E” indicate an error number.)
420
Appendix
(In the panel window, the three digits after “E” indicate an error number.)
Error No. Error name Description, action, etc.
C47 Symbol search error Definitions are not found for the symbols used in the program steps. C48 SIO-message continuous conversion error The transmitted SIO message does not match the message format or contains
invalid data. Check the transmitted message.
C49 SEL-SIO in-use error The SIO is being used by other interpreter task.
C4A SCIF unopen error Serial channel 1 opened to the user is not opened in the target task. Open the
channel using an OPEN command first.
C4B Delimiter non-definition error An end character is not defined. Set an end character using a SCHA command
first.
C4E SIO1 invalid usage OPEN error The usage of serial channel opened to the user does not match the parameter.
Check “I/O parameter No. 90, Usage of SIO channel opened to user.”
C4F SEL program/source symbol checksum error The flash ROM data has been destroyed.
C50 Symbol definition table checksum error The flash ROM data has been destroyed. C51 Point data checksum error The flash ROM data has been destroyed. C52 Backup SRAM data destruction error The backup SRAM data has been destroyed. Check the battery. C53 Invalid flash-ROM SEL global data/error list error The SEL global data/error lists in the flash ROM are invalid. C54 Flash-ROM SEL global data/error list duplication error The SEL global data/error lists in the flash ROM are duplicated. C55 Flash-ROM erase count over error for SEL global data/error lists The number of time the flash ROM containing SEL global data/error lists can be
erased was exceeded.
C56 Timing limit over error (Flash ROM erase) Error erasing the flash ROM C57 Flash-ROM verify error (Flash ROM erase) Error erasing the flash ROM C58 Flash-ROM ACK timeout error (Flash ROM erase) Error erasing the flash ROM C59 Head sector number specification error (Flash ROM erase) Error erasing the flash ROM
C5A Sector count specification error (Flash ROM erase) Error erasing the flash ROM C5B Timing limit over error (Flash ROM write) Error writing the flash ROM
C5C Flash-ROM verify error (Flash ROM write) Error writing the flash ROM C5D Flash-ROM ACK timeout error (Flash ROM write) Error writing the flash ROM
C5E Write-destination offset address error (Flash ROM write) Error writing the flash ROM
C5F Write-source data buffer address error (Flash ROM write) Error writing the flash ROM
C60 No SEL global data/error list write area error There is no area to write the erased SEL global data/error lists. C61 SEL-data flash-ROM erase count over error The number of times the flash ROM containing SEL data can be erased was
exceeded.
C62 Operation command error at servo OFF An attempt was made to execute an operation command when the servo was
OFF.
C63 Servo operation condition error The servo is not in an operation-enabled condition.