MBR-1100 Hardware User Manual
Contents 1. Introduction 1 1.1. Package contents 1 1.2. Installation 1 1.3. Physical view 3 2. Technical Data 2.1.
1. Introduction This document describes the hardware of the MBR-1100. 1.1. Package contents Media Bar Unit VESA Mount Plate and screws AC Adapter (with select power plug) Wireless Antenna HDMI Extension Cord Velcro NOT INCLUDED: A USB mouse is required for system setup 1.2. Installation Attach wireless antenna Attach the wireless antenna as shown below, and then screw antenna clockwise onto the post.
Mounting Option 2: [Attach to HDMI port] Simply plug the player into the HDMI port of the monitor as shown below. Mounting Option 3: [Attach the player on the back of the monitor using Velcro] 1. Separate the Velcro pads and stick one of them to the bottom of player. 2. Stick the other Velcro pad onto the back of monitor, and then attach the player to it. Use HDMI extension cord to connect player and the monitor.
1.3.
Physical features (left to right in above illustration) • • • • • • • • HDMI connector for digital video and audio combined output Micro SD card slot Micro USB for power adapter and ADB , Android debug console port Reset button to perform factory reset USB ports for USB content update and configuration Power(green) and Status(orange) LED indicator Ethernet port for network content update Wireless antenna post 2. Technical Data 2.1. Specifications MBR-1100 4 Video format support H.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
