Manual

20
2. Power cable: Connect to DC12V power adapter when use none POE Hub
3. Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for power
OK; Green LED flash for communication.
4. Audio out cable: Plug microphone into audio in and speaker into audio out.
 Cables: (for Full function IP camera)
1. Audio in & out cable: Plug microphone into audio in and speaker into audio out.
2. Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for power OK;
Green LED flash for communication.
3. BNC cable: Provide analog video signal for lens focus & view angle adjustment .
4. Power cable: Connect to DC12V power adapter when use none POE Hub
5. USB cable: Provide USB slot on board storage also Wi-Fi/3G Modem adapter.
6. Alarm in/Out cable: Alarm in for sensor input and Alarm out for relay trigger.