User guide

73
 CAMERA
The dome can automatically recognize the main
camera modules in the market. For the cameras it
cannot recognize, the user can set up here.
CAMERA: Move the cursor here and press IRIS
OPEN to enter the setup mode. Move the joystick
up and down to select the camera types. Press IRIS
OPEN to confirm.
BAUDRATE: Move the cursor here and press IRIS
OPEN to enter the setup mode. Move the joystick
up and down to select the baud rate. Press IRIS
OPEN to confirm.
 PARITY: Move the cursor here and press IRIS
OPEN to enter the setup mode. Move the
joystick up and down to select the parity mode.
Press IRIS OPEN to confirm.