User guide

33
5.3 Operation Instructions
1) Main Functions Fast Call Table
Our IR IP Speed dome supports 220 preset positions. You can activate some
special functions by calling upon Fast Code number 65-99.
Serial
No.
Command Fast Call Up Note
1
Start Auto Scan Call 99
Default to start auto scan
of group No.1
2
Start Auto Cruise Call 98
Default to start auto cruise
of group No.1
3
Start Pattern Tour Call 97
Default to start pattern
tour of group No.1
4
Start Auto Scan of
Group No.
Call 80+ Call pp+
Call 99
pp means：Group No.1-8
5
Start Auto Cruise
of Group No.
Call 80+ Call pp+
Call 98
6
Start Pattern Tour
of Group No.
Call 80+ Call pp+
Call 97
pp means：Group No.1-4
7
Stop Auto
Mode/End up
Setting
Call 96
8
Open OSD Menu
Preset 95（or Call
95）
9
Remote Reset Call 94
10
Recover Factory
Default
Call 82
2) System Self-Testing
The dome will do self-testing after power up, and system status will show
“Normal” if system Is running normally. If error happens, testing result will be
shown in “○” or “X”. “○” means normal and “X” means error. Please check the
according meaning as follows: