FAC – 500 FingerKey Fingerprint Access Controller User Manual Version: V1.1 Doc No.
Table of Contents About this guide ................................................................................................................. 4 License Agreement .......................................................................................................... 4 Certifications and Approvers ......................................................................................... 7 Chapter 1 Product Overview .....................................................................................
.3. Enrolling A User ....................................................................... 37 Chapter 4 FingerKey Device Menu Setup........................................................................ 43 4.1. FingerKey Menu Overview ........................................................ 43 4.2. User Manage ............................................................................. 46 4.2.1. 4.2.1.1. Enroll FP .................................................................... 46 4.2.1.2.
.4. Sys Info 84 Chapter 5 EzFingerKey Program Management................................................................ 85 5.1. Login and Password Setting ....................................................... 85 5.2. Fingerprint Device Setting ......................................................... 87 5.3. Group 89 5.4. User Management...................................................................... 90 5.5. Time Zone ....................................................................
About this guide Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you must follow to complete a task. NOTE: Tips and additional information to aid in completing a task.
included items (including the FAC-500 FingerKey access controller system, written materials and containers) to the location where you purchased them for a full refund. 1. License Grant. I-View grants to you (either as an individual or an entity) a personal, nonexclusive, nontransferable license to use one copy of the executable code of the I-View's FAC-500 FingerKey, Witness Pro and EzFingerKey software on a single CPU residing on your premises.
the accompanying documentation and that CD-ROM diskettes are free from any defects for a period of 90 days from the date of purchase (limited warranty). Except for the foregoing limited warranty, I-View expressly disclaims any and all other warranties, whether express or implied, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement of third party rights.
download or otherwise export or re-export the Witness system or related software or any underlying information or technology except in full compliance with all United States and other applicable laws and regulations. You agree to indemnify and hold I-View harmless from and against any and all liability arising from or relating to your breach of this Manual. 9. Governing Law; attorneys' fees. The laws of the Taiwan R.O.C will govern this agreement. Without regard to conflict of law principles. The R.O.C.
Chapter 1 Product Overview 1.1 Unpacking 1). One screwdriver 2). One FingerKey Access Control Machine 3). One CD (FingerKey software) 4). One FingerKey Manual 1.2 FingerKey Overview FingerKey is an easy use but high secure terminal unit, fingerprint access control.
1). FingerKey: 122X32 LCD Display Optical Fingerprint Sensor Menu key: To open the main menu. Confirm key: To confirm the present operation. Cancel key: To cancel the present operation. Power key: To control the power on and off. Press and hold for 3 seconds to showdown the power. Door bell key: To ring the door bell.
Scrolling up key: To scroll the menu up. Scrolling down key: To scroll the menu down. 2). FingerKey Program (From the CD): Display Window Fingerprint Device: To detect and set up FingerKey device. Group: To add group name for management. User Manage: To confirm and manage user data. Time Zone: To schedule users’ access time. Backup Data: To Delete, Backup or Restore data from a connected FingerKey device.
Exit button: To exit FingerKey program. Login button: To login FingerKey program for operation. 1.3 Function and Feature Text Overlay on Video: The text of Access controller can be superimposed on screen by means of video clips and projects remote live video. The text can be displayed at different sites by way of pre-setting and the font and color settings are individually adjustable.
Recording: Audio and video recordings can be activated automatically when access starts. Surge Protection: Each video input builds in a 25KV surge protector to avoid the damage of DVR from video-in voltage surges of nearby electrostatic strikes. Web Browser/I.E.: Search & playback of archiving and/or downloading options via Web Browser/I.E. can be remotely activated from anywhere, as also the monitoring of the video and audio clips of the DVR.
Chapter 2 Hardware Installation and Software Setting 2.
2.2. FingerKey Hardware Installation: 2.2.1. Power Supply Connection FingerKey supports 9-15V DC power supply as input, and can work immediately through the direct connection between GND and ＋12V . If lock-control uses the individual power supply, the current of FingerKey power supply adapter applies matching current of 500mA or over; if lock-control uses the same power supply with FingerKey, the nominal output current of the power adapter will exceed the working current by over 1000mA.
2.2.2. Door Lock Connection FingerKey can support normal-open and normal-closed door lock simultaneously, as long as it is connected with the different terminals respectively. Usually, Lock No terminal disconnects with COM terminal, and they connect when FingerKey outputs the unlocking signal and recover to disconnection when the signal ends.
1). Connecting method for power supply adapter serving for both FingerKey and door lock contemporarily. 1. Matching voltage of lock must be 9 to 5V 2. Matching voltage of adapter must be accordant with that of lock. 3. Matching output current of adapter must exceed the working current by over 1000mA.
2). Connecting method for power supply adapter serving for both FingerKey and door lock contemporarily. 1). 2). 3). Matching voltage of lock is 12V or less Matching voltage of lock’s power supply adapter must be accordant with the lock, and the output current must exceed the working current of the lock. 3Working current of the lock must less than 3000mA.
4). High current control of FingerKey and locks connection 1). 2). Matching voltage of lock’s power supply adapter must be accordant with that of lock, and the output current must exceed the working current of the lock. Matching voltage and current of relay must exceed those of the lock.
2.2.3. Connect with Out-door Switch, Door Magnetism, Doorbell and Warner Door switch is installed in the room, and you can open the door when the out-door switch is closed. The door magnetism is used to induce the opening and closing state of the door, and FingerKey can detect the state when the door is opened illegally and hence output the alarming signal. Furthermore, FingerKey will also output the alert signal if the door is not closed well within the specified time.
Doorbell Door magnetism switch + Out-door switch Warner Power supply + Warner 20 RS232 R×D Lock COM DNG Bell - DATA1 Button Door Sensor DATA0 Alarm - Bell + GND Alarm + +5V Output RS485 B GND GND RS485 A Lock NC GND RS232 R×D +12V Power Lock NO GND GND
2.2.4. Connecting with Controller FingerKey offers the standard Wiegand26 output, and can be connected with most existing Access Controller as connection with an IC card reading head or password keyboard.
2.2.5.
2.2.6. RS485 Connection GND A B GND GND +12V Power RS232 RXD Lock COM RS232 TXD Lock NO GND Lock NC RS485 A GND RS485 B Alarm＋ GND Alarm— DATA0 Button DATA1 GND +5V Output Bell＋ Door Sensor FingerKey is connected with Bell— GND RS485 network G 2.2.7.
Step2: Please enter the menu path: Option Comm Opt IP Addr Finger 2.1.7 – 1: IP Address NOTE: The first three digits of IP address are constant (Please do not change 192.168.1 these three digits or the EzFingerKey can not detect the device). Step3: Please use buttons to select the fourth digit and use 0~9 number buttons to type in the IP address. Please use number (0~9) buttons to type the forth digit of IP address, the range of the forth digit IP address will be 1to 253. Finger 2.1.
2.3. Detecting FingerKey Device (EzFingerKey Software Setting) After all FingerKey devices have been installed and connected, user needs to set up the EzFingerKey PC program and detect all connected FingerKey devices to manage the whole system. 2.3.1. EzFingerKey Login Password Setting Default setting of login name and password are null; therefore user can simply press the “OK” button to access the system.
Step3: Please click the “Change Password” button to open the “Setup Password” dialog. Finger 2.3.1 – 2: Setup Password Dialog Step4: Simply type the user name and password in each section and click the “OK” button to complete the password setting. Confirm the Password Finger 2.3.1.
Step5: After the login password has been set, user can simply type the user name and password to login the system. Finger 2.3.1 – 4: Login dialog 2.3.2. Setting Up the Fingerprint Device User needs to set up the Fingerprint Device section to detect all connected FingerKey devices before use the whole security management system. Please follow the introduction below to complete the Fingerprint Device setting. Step1: Please click the “Fingerprint Device” ( Fingerprint Device” dialog. Finger 2.3.
Step2: Please type a connected FingerKey device’s information in each column and press “Add” button to add device in this management system. Information of each connected FingerKey devices which has been set. Finger 2.3.2 – 2: Fill out connected FingerKey device information Section Description: Fingerprint NO. : A number for each connected FingerKey device Location: The connected FingerKey device location IP Address: The connected FingerKey device’s IP address.
Function Keys To exit this section. To add FingerKey device in this section. To remove a FingerKey device from this management system.
Chapter 3 Basic Operation 3.1. Properly Place The Finger The correct way is: Place a finger flatware on the sensor surface Place it to the center of the sensor surface The wrong way is: Note: Please adopt the correct way to place the finger; Our Company is not responsible for the malfunctioning results arising from improper pressing manners. Our company reserve ultimate the interpreting and modifying right for this.
3.2. Enrolling The First Administrator Setting Outline: 1). Enroll the first administrator in FingerKey device 2). Enroll the first administrator in EzFingerKey program (FingerKey PC software) 1). Enroll the first administrator in FingerKey device The default enrollment setting of FingerKey is null, everyone can press M button to enter and process the menu system.
(2) Select “Enroll Admin” and press (3) Select “Enroll FP” and press button. button. (4) Please press button to continue. (5) Please press button to continue. (6) Please use buttons to select UserID number, and press button to continue.
Step3: Until the screen displays the information as blow Simply place finger 3 times and press button to confirm this process. Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down. 2).
Step2: Press button and type the login name and password to login the system. Finger 3.2 – 1: Login password dialog NOTE: To Set up or change the login name and password, please refer to the section 2.3.1 EzFingerKey Login Password Setting on page 25. Step3: Please press the “Fingerprint Device” button ( ) to check and make sure the FingerKey device has been add in the EzFingerKey system. The display window lists the connected FingerKey devices information. Finger 3.
Function Keys: To exit this section. To add FingerKey device in this section. To remove a FingerKey device from this management system. Step4: Please press “Group” ( enrolling Administrator. ) button to add group name or department name for Finger 3.2 – 3: Group adding Section Description: Group NO.: Select a group number from 01 to 10. Description: Type a group name. Function Keys: To exit this section.
To add a group name in the system. Step4: Please press “User Manage” ( ) button to set and add enrolling administrator. Please check the Enable Box, or enrolling user can not access the FingerKey system. Finger 3.2 – 4: Setup user management Section Description: ID: Select one ID number from 0001 to 0500 for an enrolling user. Enable: To enable or disable access of the registered user. User Name: Fill out the enrolling user’s name. Password: Fill out the enrolling user’s password.
To add an enrolling user’s fingerprint data in the system. To remove a user from this management system. 3.3. Enrolling A User Setting Outline: 1). Enroll a user in FingerKey device 2). Enroll a user in EzFingerKey program (FingerKey PC software) 1). Enroll a user in FingerKey device Step1: Please press button, and the system administrator place the finger on the Optical Fingerprint Sensor to enter the menu option.
(4) Please press button to continue. (6) Please use buttons to select UserID number, and press button to continue. Step3: Until the screen displays the information as blow Simply place finger 3 times and press to confirm this process. button Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation.
2). Enroll the user in EzFingerKey program (FingerKey PC software) Step1: Please open the EzFingerKey program from PC (Double click the EzfingerKey.exe icon). Step2: Press button and type the login name and password to login the system. Finger 3.3 – 1: Login password dialog NOTE: To Set up or change the login name and password, please refer to the section 2.3.1 EzFingerKey Login Password Setting on page 25.
NOTE: For questions about how to add connected FingerKey devices in EzFingerKey system, please refer to section 2.3.2 Setting Up the Fingerprint Device on page 27. Function Keys: To exit this section. To add FingerKey device in this section. To remove a FingerKey device from this management system. Step4: Please press “Group” ( enrolling users. ) button to add group name or department name for Finger 3.
Section Description: Group NO.: Select a group number from 01 to 10. Description: Type a group name. Function Keys: To exit this section. To add a group name in the system. Step5: Please press “User Manage” ( ) button to set and add enrolling user. Finger 3.3 – 4: Setup User Management Section Description: ID: Select one ID number from 0001 to 0500 for an enrolling user. User Name: Fill out the enrolling user’s name. Password: Fill out the enrolling user’s password.
Read Finger Data: Press this button to receive the enrolling user’s fingerprint data from the connected FingerKey device after fill out the information above. FingerData: A reference for showing if the fingerprint data has been received. Function Keys: To exit this section. To add an enrolling user’s fingerprint data in the system. To remove a user from this management system.
Chapter 4 FingerKey Device Menu Setup 4.1. FingerKey Menu Overview FingerKey Menu Tree User Manage Enroll User Enroll FP Enroll Pwd FP&Pwd Enroll Admin Enroll FP Enroll Pwd FP&Pwd Delete Options System Opt Date Time Language Fmt Adv Option Reset Opts.
Idle Idle Min Lock Power Comm Opt BaudRate Dev Num IP Addr Net Speed Ethernet RS232 RS485 COMM Key Log Opt Alm SuperLog Alm Attlog ReCheck Min Access Options Define TP User Acc Opts GRP TP Define Access Comb Lock Dsen. Delay Dsen. Mode Duress Options Duress FP.
Pwd Trig Alarm Delay Auto Test Run All Test FLASH Test LCD Test FP Reader Key Test RTC Test Sys Info User Cnt FP Cnt Att Log Admin Cnt Pwd Usr S Logs Free Space Info Dev Info FPCnt AttLog S Logs Manu Time Serial Num Vendor Device Name Alg Version Firmware Ver 45
4.2. User Manage 4.2.1. Enroll User Enroll a user as user authority access. 4.2.1.1. Enroll FP Enroll user by fingerprint Function path: Menu User Manage Enroll User Enroll FP Example of Enroll FP: (1) Please select the “Enroll FP” and press (2) Please press button. button to continue. (3) Please use buttons to select UserID number, and press button to continue. (4) Simply place a finger 3 times on the optical and press confirm this process.
Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button. Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down. User Verification: User simply presses the enrolled finger on the optical sensor surface.
4.2.1.2. Enroll Pwd Enroll user by password Function path: Menu User Manage Enroll User Enroll Pwd Example of Enroll Pwd: (1) Please select the “Enroll Pwd” and press (2) Please press button. button to continue. (3) Please use 0 to 9 buttons to select UserID number, and press button to continue. Note: Please remember the enrolling UserID number for access the system next time. (4) Please use 0 to 9 buttons to type five digit password, and press button to continue.
(5) Please type the password again to confirm the password. (6) Please press button to complete this password enrollment. (7) To continue enrolling another user by password, please press button or press five times to exit. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down.
User Verification: User simply uses 0 to 9 buttons to type the enrolled UserID number and press the “OK” button to continue. Please input the password by 0 to 9 number keys.
4.2.1.3. Enroll FP & Pwd Enroll user by fingerprint and password, so user can either way use fingerprint or password to access the system. Function path: Menu User Manage Enroll User Enroll FP & Pwd Example of Enroll FP & Pwd: (1) Please select the “Enroll Pwd” and press (2) Please press button. button to continue. (3) Please use 0 to 9 buttons to select UserID number, and press button to continue. (4) Simply place a finger 3 times on the optical to continue.
(5) Please use 0 to 9 buttons to type five digit password, and press button to continue. (6) Please type the password again to confirm the password. (7) Please press button to complete this password enrollment. (8) To continue enrolling another user by password, please press button or press five times to exit. Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation.
Cancel Key: To cancel the present operation. Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down. User Verification: (1) Use Fingerprint to access the system: User simply presses the enrolled finger on the optical sensor surface.
Please input the password by 0 to 9 number keys.
4.2.2. Enroll Admin Enroll a user as administrator authority access. 4.2.2.1. Enroll FP Enroll administrator by fingerprint Function path: Menu User Manage Enroll Admin Enroll FP Example of Enroll FP: (1) Select “Enroll Admin” and press (2) Select “Enroll FP” and press button. button. (3) Please use buttons to select authority levels and press button to confirm selection and continue.
Enroller: Enroller only can access system to enroll new normal user or check system information. (4) Please press button to continue. (5) Please use buttons to select UserID number, and press button to continue. (4) Simply place a finger 3 times on the optical and press confirm this process. button to Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation.
Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down. User Verification: User simply presses the enrolled finger on the optical sensor surface. If the verification has been approved, the screen will display as below: If the Verification is failed, the screen will display as below: 4.2.2.2.
(2) Please use buttons to select authority levels and press button to confirm selection and continue. FingerKey Authority Levels Description: Supervisor: Top authority, supervisor can access all of management functions in the system. Administrator: Second authority, administrator can access most functions in the system. Enroller: Enroller only can access system to enroll new normal user or check system information. (3) Please press button to continue.
(5) Please use 0 to 9 buttons to type five digit password, and press button to continue. (6) Please type the password again to confirm the password. (7) Please press button to complete this password enrollment. (8) To continue enrolling another user by password, please press button or press five times to exit. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation.
Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down. User Verification: User simply uses 0 to 9 buttons to type the enrolled UserID number and press the “OK” button to continue. Please input the password by 0 to 9 number keys.
4.2.2.3. Enroll FP & Pwd Enroll user by fingerprint and password, so user can either way use fingerprint or password to access the system. Function path: Menu User Manage Enroll User Enroll FP & Pwd Example of Enroll FP & Pwd: (1) Please select the “Enroll Pwd” and press button. (2) Please use buttons to select authority levels and press button to confirm selection and continue.
(4) Please use 0 to 9 buttons to select UserID number, and press button to continue. (5) Simply place a finger 3 times on the optical and press confirm this process. button to Note: Please remember which finger has been enrolled for accessing the system next time. (6) Please use 0 to 9 buttons to type five digit password, and press button to continue. (7) Please type the password again to confirm the password. (8) Please press button to complete this password enrollment.
(9) To continue enrolling another user by password, please press button or press five times to exit. Note: Please remember which finger has been enrolled for accessing the system next time. Function Keys: Menu Function: Menu option button Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Scrolling Up Key: To scroll the menu up. Scrolling Down Key: To scroll the menu down.
If the Verification is failed, the screen will display as below: OR (2) User password to access the system: User simply uses 0 to 9 buttons to type the enrolled UserID number and press the “OK” button to continue. Please input the password by 0 to 9 number keys.
4.2.3. Delete This selection is to delete an enrolled user from system. Function path: Menu User Manage Delete Example of Delete function: (1) Please use 0 to 9 buttons to type the UserID number and press to continue. (2) Please press to continue. (3) Please press to continue. (4) Please press to continue.
4.3. Options 4.3.1. System Opt (System Option) 4.3.1.1 Date Time This function is to setup FingerKey’s date and time. Function Path: Menu Options System Opt Date Time Example of Date Time Setting: (1) Please select the “Date Time” and press button. (2) Please use buttons to select each section, and use 0 to 9 buttons to set up date and time, then press button to complete this setting. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation.
4.3.1.2 Language This function provides user to select different display languages. Function Path: Menu Options System Opt Language Example of Language Display: (1) Please use (2) Please press languages. buttons to select the Language section. and buttons to setup different display ENG: English Display. SCH: Simplify Chinese Display. TCH: Traditional Chinese Display. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation.
4.3.1.3 Fmt (Display Format) This function is to change the date and time’s display format. Function Path: Menu Options System Opt Fmt Example of Fmt Modify: (1) Please use (2) Please press formats. buttons to select the Fmt section. and buttons to set different display Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections.
4.3.1.4 Adv Option (System Advanced Option) Function Path: Menu Options System Opt Adv Option Note: To access Adv Option functions, user needs to enroll supervisor authority ID. Functions Description: Reset Opts.: To restore all setup information to default. Del AttLogs: To delete all flash memory logs from system. Clear All Data: To delete all enrolling fingerprints data and logs Clr Admin Pri: To release all enrolling authorities, all enrolling users will be normal users.
1:1 Thr: 1:1 Threshold Levels, ID+ Fingerprint identification and degree of register template matching. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections. 4.3.2. Power Mng (Power Manager) Function Path: Menu Options Power Mng Functions Description: Shutdown: Schedule a time to turn off the FingerKey power. Power On: Schedule a time to turn on the FingerKey power. Sleep: Schedule a time to enter sleep mode.
Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections. 4.3.3. Comm Opt (Communication Options) Function Path: Menu Options Comm Opt Function Description: BaudRate: Baud Rate is a measure of how fast data is moving between instruments that use serial communication. In the FingerKey system, there are three selections which is 9600, 38400 and 115200.
2.2.7 Set up FingerKey System IP Address on page 23. Net Speed: Network speed, the default network speed is 10M-F. Ethernet: To set if open Ethernet communication. RS232: To set if open RS232 communication. RS485: To set if open RS485 communication. Warning: RS485 communication in the outdoor environment, the lightening protection device is required. COMM Key: the default system keyword is 0; user may need to define it. Function Keys: Confirm Key: To confirm the present operation.
attendance logs, while the setting number has been reached, the system will trigger the alarm. The number range of counting supervisor logs is from 0 to 99. ReCheck Min: Rechecking time, this function is to set within specific minutes, no matter how many times a user accesses the FingerKey system, the system will only save the first access time in log. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections. 4.3.5.
Setting Time Plane number (2) Please select day and time to set up. Setting number one time plan accessing schedule Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections. 4.3.5.2. User Acc Opts User Access Options, this function is to process correlative setting according to user’s requirement. Function Path: Menu Options Access Options User ACC Opts Example of User Access Options setting: 1).
2). Select a function to set up user. Function Descriptions: Belong to GPR: To divide a registered user in a group. Use GRP TPs: To set if use group time plans. TP1: To set first time plan for a registered user. TP2: To set second time plan for a registered user. TP3: To set third time plan for a registered user. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel the present operation. Selection Keys: To select the selections.
4.3.5.3. GRP TP Define Define Group Time Plan, This function is to configure and group the setting schedule. Function Path: Menu Options Access Options GRP TP Define Example of GRP TP Define setting: 1). Use number keys and press buttons to select a group number, and button to continue. 2). Please use buttons to select a group number, and press button to set. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel or exit the present operation.
4.3.5.4. Access Comb Access combination is the direct representation of access controlling. For example, if user wants that all registered users cannot unlock, then the user can set all 10 access combinations to null. Access combination definition is to define different unlocking combinations, and each combination is composed of different groups. Access combination directly uses group number and does not consider user verification sequence between each group.
2). Use number keys to set groups number in Comb 1, and press button to continue. 3). After all combs setting has been done, please press Access Comb section, and then press button to exit the button to save changes. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel or exit the present operation. Selection Keys: To select the selections. 4.3.5.5. Lock System requires setting fingerprint scanner to control the time of opening electronic lock.
Use buttons to select Luck function and press button to set up. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel or exit the present operation. Selection Keys: To select the selections. 4.3.5.6. Dsen Delay Door Sensor Delay, This function is to set seconds of triggering an alarm after opening the door. Function Path: Menu Options Access Options Dsen Delay Example of Lock setting: Please Use buttons to select Luck function and press button to set up.
4.3.5.7. DSen Mode Door Sensor Mode, there are three selections of this section. NO: Normally Open, the contacts of a switch or relay are normally open or not connected. When activated, the contacts close or become connected. NC: Normally Closed, the contacts of a switch or relay are closed or connected when at rest. When activated, the contacts open or separated. None: Not using electromagnetic system or don’t care.
Function Descriptions: Duress FP: To enroll or disable existing registered fingerprints. Help Key: To enable or disable the help key. 1:1 Trig: To set if registered users need to input the ID number to verify the duress fingerprint and trigger alarm. 1:N Trig: To set if registered users verify duress fingerprint directly to trigger alarm system. Pwn Trig: To set if registered users can trigger alarm by password. Alarm Delay: To set seconds to trigger an alarm after verify a duress fingerprint.
New Enrollment: To enroll a new duress fingerprint for an existing registered user. 1). Select an existing registered UserID by numeric buttons, and press button to continue. 2). Please choose a finger which has not register in FingerKey system before, and then please place the finger three times to be a duress finger. 3). To confirm this duress fingerprint enrollment, please press button to complete. Def. DuressFP: To define a fingerprint to be a duress fingerprint by an existing registered UserID.
Undef DuressFP: To disable a duress fingerprint from the system. Undef All: To disable all of duress fingerprints from the system. Function Keys: Confirm Key: To confirm the present operation. Cancel Key: To cancel or exit the present operation. Selection Keys: To select the selections. 4.3.5.9. Auto Test This section is to test system devices to check if every components works properly. There are six selections of the system test below: 1).
4.4. Sys Info 1). User Cnt: The amount of registered users. 2). FP Cnt: The amount of registered fingerprints. 3). Att Log: The amount of the user access logs. 4). Admin Cnt: The amount of the registered administrators. 5). Pwd Usr: The amount of the registered password. 6). S Logs: The amount of the management logs 7). Free Space Info: The amount of the free space. 8). Dev Info: Device Information FP Cnt: The maximum system space of the fingerprints.
Chapter 5 EzFingerKey Program Management EzFingerKey is a PC program to easily manager registered user and enrollment data of a FingerKey device. Finger 5 -1: EzFingerKey program overview 5.1. Login and Password Setting 1). Login: The default login name and password of EzFingerKey is null, user can simply click the “Login” ( ) button to login. Finger 5.
2). User name and password setting: Please click the “Change Password” button to open the “Setup Password” dialog, and type the user name and password in each section, and then click the “OK” button to complete the password setting Confirm the password Finger 5.1.
5.2. Fingerprint Device Setting This function is to set up a FingerKey device information and connect with each other. Please click the “Setup Fingerprint Device” ( ) to open the fingerprint device setting dialog. FP number section, if the section is empty, simply The connected FingerKey click to add a new device list window Finger 5.2. -1: Setup fingerprint device To add a new FingerKey device, simply move the cursor to an empty FP number section and click for adding.
IP Address: The connected FingerKey device’s IP address. The IP Address need to be same as connected FingerKey device’s IP address. To check or set up FingerKey device’s IP address, please refer to the section 2.2.7 Set up FingerKey System IP Address on page 23. In/Out: A mention of setting FingerKey for people entering of going out. Machine No.: The FingerKey device’s machine number. Function Keys To exit this section. To add FingerKey device in this section.
5.3. Group This function is to set up group for easy management. Please press “Group” ( button to add group name or department name for enrolling users. Finger 5.3. -1: Group setting dialog Section Description: Group NO.: Select a group number from 01 to 10. Description: Type a group name. Function Keys: To exit this section. To add a group name in the system.
5.4. User Management Please press “User Manage” ( ) button to set and add enrolling users. ID number section, if The registered user list the section is empty; window simply click the section to add a new enrolling user. Finger 5.4.-1: User Management setting To add a new enrolling user, simply move the cursor to an empty ID number section and click for adding.
Function Keys: To exit this section. To add an enrolling user’s fingerprint data in the system. To remove a user from this management system.
5.5. Time Zone This function is to schedule registered users’ FingerKey system access time. To start this function, please simply click the “Time Zone” ( ) icon on the top to open the time zone function dialog. Set up a registered user’s access time schedule everyday. Finger 5.5. – 1: Schedule Time Zone Section Description: User: Select a registered user to be schedule an access time. In Fingerprint: Select a FingerKey device. Function Keys: To exit this section.
5.6. Backup Data This function provides user to backup all of the registered users’ data from this EzFingerKey management system. To start this function, Please simply click “Backup Data” ( ) icon on the top to open the backup data function dialog. Finger 5.6 -1: EzFingerKey program overview Section Description: Fingerkey: Select a FingerKey device. Open Door in Sec.: Set seconds for opening door while registered users access. Function Keys: To exit this section.
Chapter 6 Functions with Witness DVR Program Witness DVR program can support maximum 16 FingerKey devices. With Witness DVR program support, user can identify entrance access person easily. Every success or fail FingerKey verification will be listed on the Witness’s live, playback and log images. 6.1. Setup I/O Port 1). To start the FingerKey support setting in Witness program, please click “Set up I/O port” ( ) icon on the bottom of Witness program to open the I/O setting dialog. Finger 6.
2). Click the “Set up Access Controller” button to enter the Access Controller setting dialog. “Set up Access Controller” Function Description: Fingerkey: To select a FingerKey device. ` Enable FingerKey: To enbable or disable a FingerKey. Set up Schedule: To set up monitoring schedule of the FingerKey. Event Selection: 1). Trigger: To set the actions of the Witness while the FingerKey has been triggered. 2). Verify Fail: To set the actions of the Witness while the FingerKey verify fail. 3).
Enable sound alarm: To enable about if the Witness will start sounding alarm with the “Select sound alarm” setting while the event has been triggered. Enable Notification: To enable about if the Witness will implemet the “Set up notification” setting while the events has been triggered. Trigger Speed Dome: To enable about if the Witness will trigger speed dome with the “ Selection positions” setting while the event has been triggered.
6.2. View Log To see the FingerLog file, simply press “View Log” ( ) button on the bottom of the Witness program to open the log display window, and select the last clumlon Select date for log display Log Display Window Finger 6.2. -1: Log display list Function Keys: Save Log: To save the log file of the selecting date. Clear log: To clear the selecting date log list from the display window. Exit: To exit this function.
6.3. POS Playback – EzPosPlayback EzPosPlayback provides users to easily search specific video file by time, preset keywords and keywords searching. 1). Overview Searching by date from the calendar Video Display Window Timestamp Playback File List Screen Text Record List, Witness Preset Keyword and specific keyword searching Finger 6.3. – 1: EzPosPlayback Overview functions. 2). Playback function description: 8 2 3 9 10 4 11 1. Play button 2. Stop button 4. Rewind 5.
7. Repeat button 8. Zoon in 10. Fit to screen 11. Resize 13. Copy video clip 14. Display keyboard 9. Zoon out 12. Snapshot 3). Searching function description: Text record list: User can select a list and press the play button to view the video. Keyword selection: The Keywords which has been preset in Witness Pro program, user can find the video file to play by selecting the preset keyword. Searching function: User can type the specific word directly to search the video file. 4).
Step2: While user selects a date from the calendar, the Timestamp Playback List screen will list all day long AVI playback file for user. User can easily search a playback file by the time division. Step3: While user selects a file from the Timestamp Playback List screen, the Text record list will display all of the POS issues; moreover, the Video Display Window will display the starting point video image of the selecting POS issue.
Chapter 7 Trouble Shooting 1. Cleaning From time to time, the optical platen, the keypad and display window require cleaning. Since working environments differ, it is not possible to define when cleaning should be performed. Following is guide: Figure 0-1 Cleaning Schedule Item Keypad Cleaning Frequency and window display Cleaning when visibly dirty and hard to read. See cleaning the keypad and display below. Do not over clean.
Specification Item \ Model FAC-500 FAC-1500 Plus Storage Capability 500 Fingerprints / 30,000 Records 1500 Fingerprints / 50,000 Records Communication Verification Access Alarm TCP/IP 1:1 or 1:N Fingerprint 1:1 or 1:N Fingerprint Password + Fingerprint Password + Fingerprint RFID + Fingerprint 50 Time zones; 5 Groups and 10 types open door combinations System alarm when destroying device, illegally open door, and door open time over setting period.
