User Manual

7. Pan/Tilt/Zoom button: Move the Pan/Tilt/Zoom position of IP Speed dome camera.

8. Storage path: Click “ Setup” button to setup the storage path.

9. Video Stream: Select the video stream mode Main/Sub streaming on the live video.

10. Live video: The main screen to show the live video, click “ Esc “ key to enlarge the video

screen, click again restore the screen size.

4-3 The Network setup Function Description

In ‘Network setup’ menu, you can configure basic IP camera settings like data transfer protocol

and data storage folder…etc.

 Network status: Click this button to check the current Mac address, IP address, type,

Gateway..ect information of IP camera.

 Ethernet setup: Click this button to modify the current IP address, enable/disable DHCP and

DNS IP address.