Manual

19
1-5. Product Parts Description
 Cover: Dome cover support vandal resistance function.
 Pan / Tilt base: Control panning/ tilting angle of camera.
 IR-LED: 30 pieces 14 IR-LED for night vision.
 Lens: 3 ~ 9mm (F1.2) Vari-focal Lens Module.
 IR Sensor: Detect the illumination of environment to enable the IR-LED when dark.
 Cable (Standard version)
1. Audio in cable: Plug microphone into audio in.
2. Power cable: Connect to DC12V power adapter when use none POE Hub
3. Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for
power OK; Green LED flash for communication.
4. Audio out cable: Plug microphone into audio in and speaker into audio out.
 Cables: (for Full function IP camera)
1. Audio in & out cable: Plug microphone into audio in and speaker into audio out.
2. Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for power
OK; Green LED flash for communication.
Cable
Tilt base
Cover
Pan base
Lens
IR LED
POE module
IR Sensor