Instruction Manual

168
path for storing the transmitted pictures if needed.
4. * Image size: There are 3 kind choices; one is “Original” sizes that will same as recording
resolution. The other are 320 x 240 and 160 x 120 resolution.
* Image quality: Select the image quality. The volume from 1-100; the bigger number will
better quality and slower transmission speed.
* Image refresh: The setting for refresh the image. The volume from 500-5000 ms (i.e. 0.5-5
seconds); the smaller number will get fast transmission speed, but it will take more 3G
bandwidth.
5. Save: Save all the setting parameters.
6. Cancel: Exit and setting program.
Step3: Click “ “to see the status.
Step4: Click “Stop “to finish the setup. The default is to enable “Start “function.
Step5: Connect your mobile phone to the Internet and enter the IP address or DNS and port number to
connect local NVR.
Step6: The screen in mobile will be shown as below when the connection is successful.
Step7: Select “ Split video “ or single camera to view the live video from local NVR. Click split
video section that you can maximum select 8 cameras to view on a screen at a time.