User's Manual

www.tuv.com
Test Report No.: 14014459 001 Appendix 4 page 30 of 41
(Page 13)
Resetting or Removing Pairing
You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings.
1. Switch off your headset
2. Press and hold the volume key and MFB together for 2 seconds to enter the setup mode.
3. Select Factory Reset from the list and toggle "Yes" by pressing the MFB once.
4. Hold the MFB for 2 seconds to confirm the factory reset.
5. An "OK" sign is shown and the headset is reset to the factory settings.
Note: After resetting, all previous pairing settings are cleared.