www.tuv.com 1.6 User Manual (Cover) i.Tech Clip D User Guide Version 1 14-Aug-2006 Project No. : C51-A06059-XX Test Report No.
www.tuv.com [Inside Cover] i.Tech Clip D Bluetooth Headset gives you more freedom on the move. Pair with compatible Bluetooth mobile phones and this headset makes it easier for you to carry on with your tasks whilst making or taking a call. i.Tech Clip D Bluetooth Headset is compliant with Bluetooth Version 2.0 Class 2 specifications, and is compatible with the latest mobile phones supporting Bluetooth Headset or Handsfree Profiles. Test Report No.
www.tuv.com (Page 0) Contents Title Page i.
www.tuv.com (Page 1) i.Tech Clip D Bluetooth Headset Overview 1 2 3 4 8 5 7 6 Figure 1 1. Built-in Buzzer 2. Display with backlight 3. Charging Socket 4. Volume / Setting Button Test Report No.: 14014459 001 5. Built-in Microphone 6. Built-in Rechargeable Battery 7. Earpiece 8.
www.tuv.com (Page 2) Display Information Battery Icon (Full Capacity) Battery Icon (Half Capacity) Battery Icon (Empty / Low Battery) Bluetooth Status (Switched on and Paired) Bluetooth Status (Switched on and Unpaired) Bluetooth pairing Bluetooth Successful Paired Unsuccessful pairing of Bluetooth Bluetooth successful connected to Bluetooth-Ready Phone Bluetooth disconnected to BluetoothReady Phone Buzzer On Unanswered Call Test Report No.
www.tuv.com (Page 3) Setting Function You may set your headset in your profile anytime. To do this, you need to turn off the headset first and then press and hold the Volume button and MFB button for 2 seconds. You can then select between different functions by pressing the Volume button. To toggle between the settings, press the MFB once and to confirm the selection, hold the MFB for 2 seconds. You will be notified of your selection by an "OK" sign on the headset display.
www.tuv.com (Page 4) Getting Started To use your i.Tech Clip D Bluetooth Headset (“the headset”), please follow the steps below: 1. Ensure your headset is fully charged 2. Pair your charged headset with a Bluetooth-enabled mobile phone Figure 2 Test Report No.
www.tuv.com (Page 5) Charging Your Headset Figure 3 The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first. Test Report No.
www.tuv.com (Page 6) Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the mains charger to an AC wall outlet. The battery icon showed on the headset will be displayed during charging. IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Normal Charging Time It takes about three hours to fully charge the battery.
www.tuv.com (Page 7) Turning Your Headset On and Off Turning On the Headset Press and hold the MFB (see Figure 1) for two seconds until you hear a short beep. The display will prompt “i.Tech Dynamic”.. IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer to “Pairing Your Headset”.
www.tuv.com (Page 8) Pairing Your Headset Figure 4 The headset works with Bluetooth-enabled mobile phones only. Prior to using and pairing your headset for the first time, please check if your mobile phone is Bluetooth-enabled. This information will normally feature on the packaging or user guide that is provided with your mobile phone. The pairing instructions for a typical Bluetooth-enabled mobile phone are explained on the next page.
www.tuv.com (Page 9) Pairing Your Headset 1. Place the headset and the mobile phone where they are no more than one meter apart. 2. Ensure the headset is off. (The display is unlit) 3. Press and hold the MFB until the headset’s display will show “Pairing”. 4. Activate your mobile phone’s Bluetooth function. Please refer to your mobile phone user guide for details. 5. Set the mobile phone to search for Bluetooth devices within the one meter range, as instructed in the mobile phone user guide, and select “i.
www.tuv.com (Page 10) Using Your Headset Answering a Call When there is an incoming call, you will hear the ring through the earphone. Press the MFB once to accept the call or answer the call via your mobile phone in the normal way. Ending a Call Press the MFB once to end your call, or end the call via your mobile phone in the normal way. Adjusting the Volume Press the volume button repeatedly until you reach the desired volume level. The headset’s display will show a 7-tiered audio level.
www.tuv.com (Page 11) Using Your Headset Call Muting During Conversation During conversation, press and hold the Volume Key for 2 seconds to mute the built in microphone. When the mute function is activated, you will hear a short beep every 5 seconds accompanied by the headset’s status indicator flashing every 5 seconds. To cancel, hold the Volume Key for 2 seconds to de-activate the muting function whilst in conversation.
www.tuv.com (Page 12) Using Your Headset Last Number Redialing from Your Headset Press the MFB on your headset twice. IMPORTANT: The above functions are only applicable to mobile phones with Bluetooth Handsfree Profile. Functionality varies depending on the mobile phone model you have. Please refer to your mobile phone user guide for additional information. Rejecting a Call (Handsfree Profile ONLY) Press and hold the Volume Key and the MFB key together for 2 seconds until the incoming call is rejected.
www.tuv.com (Page 13) Resetting or Removing Pairing You may reset the headset to its original settings anytime. To do this you also clear all current pairing settings. 1. 2. 3. 4. 5. Switch off your headset Press and hold the volume key and MFB together for 2 seconds to enter the setup mode. Select Factory Reset from the list and toggle "Yes" by pressing the MFB once. Hold the MFB for 2 seconds to confirm the factory reset. An "OK" sign is shown and the headset is reset to the factory settings.
www.tuv.com (Page 14) Care and Maintenance Headset Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile phone may place an unintended call. Do not expose the headset to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaners to clean the headset. Do not expose the headset to extremely high or low temperatures. Do not leave your headset under the hot sun for a long time.
www.tuv.com (Page 15) Built-in Battery Do not attempt to replace the headset’s battery as it is in-built and is not changeable. Charge the battery in accordance with the instructions supplied with this user guide. Use only the charger supplied by the headset’s original manufacturer to charge the battery.. Charger Use only the charger supplied by the headset’s original manufacturer to charge the headset. Other chargers may look the same, but they could be dangerous.
www.tuv.com (Page 16) Safety Information Check and observe local laws regarding the use of a mobile phone and headset while driving. If you use the headset while driving, ensure your full attention and focus. It is your responsibility to drive safely. Consider to pull off the road before making or answering a call. Never leave your headset above any air bag deployment area inside your car as serious injury may result when an air bag deploys.
www.tuv.com (Page 17) Troubleshooting If you are unable to connect your headset and mobile phone, please try the following: Ensure your the battery is fully charged. Turn off your headset, and then turn it on again. Ensure the headset is paired with your mobile phone. Ensure your mobile phone’s Bluetooth function is activated. (For some phone models, a headset icon will appear on the phone’s screen.) Please refer to your mobile phone user guide for specific instructions.
www.tuv.com Test Report No.
www.tuv.com Test Report No.
www.tuv.com (page 18) Test Report No.
www.tuv.com Declaration of Conformity (DoC) We, i.Tech Dynamic Ltd., declare that the following product: Product Name: i.Tech Clip D Model No.: C51-A06059-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at: http://www.itechdynamic.com Test Report No.
www.tuv.com (Page 19) Product Specifications Bluetooth Specification: Version 2.0 Class 2 Bluetooth Profile Supported: Headset and Handsfree Profiles Range of Frequency: 2.4GHz spectrum Nominal Charging Time: Within 3 hours Talk Time*: Up to 6.5 hours Standby Time*: Up to 150 hours Dimensions: Weight: 53.5mm (L) x 25.5mm (W) x 23.8mm (H) 26.3 grams *May vary due to the user’s habit, different modes of operation, and mobile phone settings. Test Report No.
www.tuv.com (Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be quoted or reproduced without the prior written permission of the company. The contents of this publication are believed to be correct at the time of going to print, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.
www.tuv.com Dispose of the packaging and this product in accordance with the latest provisions. Notes on Environmental Protection After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste.
