User's Manual

www.tuv.com
Test Report No.: 14011226 001 Appendix 4 Page 21 of 35
(Page 4)
Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the charger to an AC wall
outlet. The LED indicator will stay red during charging.
IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Normal Charging Time
It takes about three hours to fully charge the battery. When the battery is fully charged, the LED indicator will
turn blue and remain on. Unplug the charger from the AC wall outlet and the charger plug from the headset.
Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to “Turning Your
Headset On and Off” on the next page for details.
Talk and Standby Time
The fully charged battery can offer up to 10 hours of talk time and up to 200 hours of standby time. When there
are no calls the headset should remain turned on in standby mode.
Battery Low Indication
When the battery has become low when the headset is on, the LED indicator will flash red and the headset will
emit a beep* every minute. Please follow the instructions describe above to recharge the battery.
*If you are setting up the headset and your mobile phone in a noisy environment, we advise you to put on the
earphone first so that the beep will be more audible.