www.tuv.com 1.6 User Manual (Cover) i.Tech BlueBAND User Guide (Version 1 – 28-Apr-2005) Test Report No.
www.tuv.com (Page 0) Contents i.Tech BlueBAND Overview…..……………..………………………………………2 Getting Started………………..……………..………………………………………3 Charging Your Earphone…………………………………………………………….4-5 Nominal Charging Time…………………………………………………………5 Talk & Standby Time………………………………………………………….5 Low Battery……………………………………………………………………...5 Turning Your Earphone On and Off………………………………………………….6 Pairing Your Earphone..…..
www.tuv.com (Page 1) i.Tech BlueBAND Overview Volume Key (+) Built-in rechargeable battery Dual color LED Indicator Multifunction Button (MFB) Volume Key (-) Adjustable-pitch Arm Fig. 1 (Right Channel Earphone) Left Audio Earphone Right Audio Channel Charging Socket Fig. 2 (Left Channel Earphone) Getting Started To use your i.
www.tuv.com (Page 2) Wearing Your i.Tech BlueBAND Fig. 3 Wearing your Earphone Test Report No.
www.tuv.com Page 3 Charging Your Earphone Fig. 4 The Earphone comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time. Test Report No.
www.tuv.com Page 5 Charging Your Earphone Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The LED will be red while charging. IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Nominal Charging Time Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue and remains on for 30 minutes.
www.tuv.com Page 6 Turning Your Earphone On and Off Turning On the Earphone Press and hold the MFB for 2 seconds until you hear a short beep. The LED will flash blue. IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Earphone” on page 7-8. Turning Off the Earphone Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops.
www.tuv.com Page 7 Pairing Your Earphone Up to 1 meter Prior to using your Earphone for the first time, you must pair it with a Bluetooth-enabled mobile handset or Music Player (The “Device”). The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset or music player. Earphone pairing procedure is subject to different models of mobile handsets and music player. Test Report No.
www.tuv.com Page 8 Pairing Your Earphone 1. 2. 3. 4. 5. Place the Earphone and the device where they are easily viewable by no more than 1 meter apart. Ensure the earphone is OFF. Press and hold the MFB until the earphone LED alternately flashes blue and red. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. Set the device to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user guide and select “i.
www.tuv.com Page 9 Using Your Earphone Answering a Call When there is an incoming call, you will hear ringing through the earphone. Press the MFB to accept the call or answer the call via your mobile handset in the normal way. Answering a Call when Listening to Stereo Audio Press the MFB once to answer the call and when finished, press the MFB once to resume stereo audio. If the other party you are speaking to ends the call, stereo audio will automatically resume without having to pressing the MFB.
www.tuv.com Page 10 Using Your Earphone Voice Dialing from Your Earphone If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function. Last Number Redialling from Your Headset Press the MFB on your headset twice.
www.tuv.com Page 11 Adjusting the Volume Press the Volume Key repeatedly until you reach the desired volume level. Resetting / Removing the Pairing You may want to reset the headset to its original settings. This also clears all current pairings. 1. 2. 3. 4. 5. Ensure the headset is OFF. Press and hold the Volume Key until the LED alternately flashes blue and red rapidly. Release the Volume Key. Press and hold the Volume Key again until you hear 2 beeps.
www.tuv.com Page 12 Care and Maintenance Earphone Consider turning your earphone off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call. Do not expose the earphone to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaning solvents to clean the earphone. Do not expose the earphone to extremely high or low temperatures. Do not dispose of the earphone in a fire as it will result in explosion.
www.tuv.com Page 13 Built-in Battery Do not attempt to replace the earphone’s battery yourself as it is in-built and is not changeable. Charge the battery in accordance with the instruction supplied with this user guide. Only use the manufacturer supplied charger when charging the earphone. Charging Only use the manufacturer supplied charger when charging the earphone. Do not disassemble the charger as it may expose you to dangerous voltages of other risks.
www.tuv.com Page 14 Safety Information Check local laws regarding use of a mobile handset and earphone while driving. If you use the earphone while driving, ensure your attention and focus remains on your responsibility of driving safely. Never allow children to play with the earphone – small parts may be a choking hazard. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas.
www.tuv.com Page 15 Troubleshooting If you are unable to connect your earphone and mobile handset, please try the following: Ensure your earphone is turned off and is properly charged. Ensure the earphone is paired with your mobile handset. Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.
www.tuv.com Page 16 Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Earphone, Handsfree and A2DP Range of Frequency: 2.4GHz Spectrum Dimensions: 90mm (L) x 80mm (W) x 119mm (H) Nominal Charging Time: Within 3 hours Talk Time*: Up to 6 hours Standby Time*: Up to 150 hours Weight: 67.6 grams *may vary due to users’ operation mode and mobile phone settings Test Report No.
www.tuv.com (Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.
