User's Manual

www.tuv.com
Test Report No.: 14009429 001 Appendix 4 page 24 of 30
<Page 9>
Adjusting the Volume
Turning the
Navigation Key
repeatedly for increasing the desired volume or pushing down the
Navigation Key
repeatedly for decreasing the volume.
Resetting / Removing the Pairing
You may want to reset the headset to its original settings. This also clears all current pairings.
1. Ensure the headset is OFF.
2. Turn and hold the
Navigation Key
until the
LED
alternately flashes blue and red rapidly.
3. Release the
Navigation Key
.
4. Press and hold the
Navigation Key
again until you hear 2 beeps.
5. Recharge the headset for a few seconds
The headset is turned off and returns to the original settings. All current pairings are cleared.