Datasheet

INTRODUCTION

This car dis a network adaptor for desktop computers with the PCI express x1

interface offering the latest technology in the Power Management and Gigabite

Computer Network areas.

SPECIFICATION

?Chipset: Realtek RTL8111C

?Interface: PCIe x1, spec. 1.0a (up to 2.5 Gbps )

?Supported standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q, 802.1P,

CSMA/CD, TCP/IP

?Network adaptor - speed: 1000/100/10 Mbps

?Support for MDI/MDI-X: yes on all speeds

?Support for Wake on LAN / Remote wake up: yes / yes

?Socket for Boot ROM: ne; Integrated EEPROM is included

?Supports Flow Control, Jumbo framework, Full/Half Duplex, Auto Negotiation

?Status indication: 2x LED diode (1000/100/10M Link/Act)

?Connector: 1x RJ-45

?Supported OS: DOS, Windows 98se/Me/2000/XP/XP64/, Vista32/64, Win

7/8/8.1 32/64, Windows Server 2003/2008/2008 R2 32/64, Linux, Unix,

Novell, Mac OS

PACKAGE CONTENTS

?i-tec PCIe Gigabit Ethernet Card

?Low Profile Backplate

?User's Manual

INSTALLING THE PCIe CARD TO PC

1. Switch off the computer and disconnect it from the mains.

2. Remove the PC cover a remove the cover strip of the corresponding PCIe slot.

3. Carefully mount the PCIe card to a free PCIe slot and secure it with a screw.

4. Put back the PC cover and connect the PC to the 230V mains. Switch on the PC.

INSTALLING THE DRIVERS

Windows® / Linux – the drivers will be installed automatically from the system. If

necessary restart the PC.

Other systems – required drivers you can find on our website www.i-tec-

europe.eu in the "Download" tab for this product.

Checking the correct installation in OS Windows®

Go to Hardware Manager (e.g. in WinXP: Start-Control Panels-System-Hardware-

Hardware Manager or Win 7: Start-Control Panels-Small Icons-System-Change

Settings-Hardware- Hardware Manager)

Under the Network Adaptors item you will see new hardware: Realtec PCIe GBE

Family Controller.

i-tec PCIe Gigabit Ethernet Card

ENGLISH