Datasheet

DRIVER INSTALLATION FOR ETHERNET PORT
Windows Operating System
 Please download the current drivers on www.i-tec-europe.eu and start the installation by
double-clicking on the file.
 Wait for the program to install the drivers.
 Click <Finish> to complete the installation.
Mac Operating System
 Please download the current drivers on www.i-tec-europe.eu and start the installation by
double-clicking on the file.
 Wait for the program to install the drivers.
CONNECTION TO A NOTEBOOK / PC
 Connect the USB cable to a USB port on your notebook / PC.
 Then start the automatic installation of USB ports in various systems – it is recommended to be
connected to the Internet for online download of newer versions of drivers.
 Restart your notebook / PC.
 Connect the adapter to an available network when the installation procedure is completed.
 Connect one end of the Ethernet cable into the RJ-45 port of the device and the other end into
an active element of your network - HUB, switch, router (preferably with Gigabit speeds for
maximum speed adapter). If necessary, restart your notebook / PC.
VERIFYING THE DRIVER FOR ETHERNET PORT
To verify the driver of the adapter, follow the steps below to open the Device Manager on
Windows®
Following the path as below to open the device manager
 Windows® 10: Start / Device Manager
 Windows® 7 / Windows® 8 / Windows® 8.1: Control Panel / System and Security / System /
Device Manager
 In the Network adapters group, an item named „ASIX AX88179 USB 3.0 to Gigabit Ethernet
Adapter“.
To verify the driver of the adapter, follow the steps below to open the Device Manager on Mac®
 Please connect the USB to LAN device to MacBook / PC.