Specifications

ManualsBrandsI.T.E ManualsElectronicsPIN Pad

A10P manual

Page 1

PIN Pad A10-P

The A10-P is a compact PIN pad, designed to support financial

inclusion scenarios as well as innovative payment schemes in mature markets.

Another optional feature is fingerprint reader, the spec is TBD.

Quick Features

• 4-in-1 PIN pad: MSR, Chip, NFC and PIN entry

• USB or RS-232 interface connectivity pure PIN pad

• POS-A transmission type

• Colorful LCD display

• High performance and security

• PCI & EMV Level 1 & Level 2 certification approved, typical payment brand schemes supported

Specification

Processor

Microchip SAMA5D28

Memory

DDR2 64MB

Storage

Flash 256MB

Display

2.8” IPS 320x240

Linux

Audio

Buzzer (Default)

Speaker x1 (PCBA Reserved)

Buzzer Sound Pressure Level:70 dB/10cm(2.5KHz)

Reader

Magnetic Card

Reader

Bi-directional, support triple tracks

ISO7811

Speed 5 to 40 IPS

1,000,000. swipe times

Smart Card

Reader

ISO7816, T=0 , T=1

EMV Level 1, Support 5V/3V

500,000. inserted times

Contactless

ISO14443A&B,

MIFARE

HW Ready for NFC

I/O Connector

RJ45

Wafer to RJ45 (optional)

Pig-tail cable

Wafer to USB/RS232

(Cable selection)

(USB port A for SAMBA)

DC Jack

On cable

SAM

X0, x2(optional)

Debug console

2.54mm Head X1(2pin)

LED indicator

Mono, Green X4 for EMV

Keypad

Rubber Keys *18 (Func. keys*3, STD Keys *15)

Environment

Operating

0°C to +50°C

Summary of content (4 pages)

PAGE 1
A10P manual PIN Pad A10-P The A10-P is a compact PIN pad, designed to support financial inclusion scenarios as well as innovative payment schemes in mature markets. Another optional feature is fingerprint reader, the spec is TBD.
PAGE 2
A10P manual Temperature Storage Temperature -20°C to +70°C Humidity 5% to 90% Reliability Requirements MTBF 100,000 hours Drop test 76 cm without damage Air：+/-15KV Contact：+/- 8KV ESD Installation guide(USB Interface) 1 2 Plug the USB cable to the USB port of PC.
PAGE 3
A10P manual FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
A10P manual CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.