User's Manual

www.i-sens.com 48
Setting the Time Alarms (alarm 1~3)
Without inserting a test strip, press the ▲ button and
the S button simultaneously for 3 seconds
to enter the time alarm mode. The ‘alarm1’
will be displayed while the ‘OFF’ character
blinks on the screen.
By pressing the ▼ button, the ‘alarm1’ is set and the
‘On’ character will be displayed on the screen.
Press the ▼ button again to cancel the ‘alarm1’. The
‘OFF’ icon will be blinked on the screen.
Press the ▲ button to adjust the time of the ‘alarm1’.
A number representing the time will be blinked
on the screen. Press the ▼ button to set the time.
Press the ▲ button to end.
Step 1
Step 2
Step 3